General Care & Cleaning

of glass shield

 

and remove it.

Halogen

 

Light Bulb

Changing the Oven Light

An interior oven light will turn on automatically when the oven door is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the control panel.

The lamp is covered with a glass shield. The glass shield can be removed to be cleaned manually or to change oven light. THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the light bulb:

CAUTION: BE SURE THE OVEN iS COOL.

1.Turn the power off at the main source.

2.Wear a leather-faced glove for protection against possible broken glass.

3.To remove the glass shield, pull the back side of the shield toward the inside of the oven in a manner to lift it up from the oven side.

4.The glass shield should come out easily by pushing a little toward front of the range.

5.Replace halogen light appliance bulb taking care not to touch the bulb with your bare fingers. Touching bulb with your skin can leave a film on the bulb that causes it to burn out quickly.

6.Replace glass shield in opposite order and manner of removal.

Cooking Table

 

_

CONVECTION BAKE pad

Food Type

 

Decrease

in normal

 

 

 

cook

times

Frozen

foods, pies,

15-25

%

pastries

and pizza

 

 

 

Refrigerator

cookies

15-35 %

Refrigerator

biscuits

15-30

%

Rolls & Breads

20-25%

Fresh Pies/Pastries

10-20

%

Begin with the maximum reduction in cook time and adjust as needed.

*Recommended reduction in cook time based on brands of food items tested. Cook time may vary with your specific brand of food item.

31

Page 31
Image 31
Kenmore 790.4906 manual Cooking Table, Glass shield Remove it Halogen Light Bulb