WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat-

ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

Use your unit as a blower for:

D Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.

S Blowing grass clippings, straw, or leaves into piles, around joints, or between bricks.

PLAN AHEAD

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec-

tion should be marked Z87.

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or clothing with loosely hanging straps, ties, tassels, etc.

They can be caught in moving parts.

DDo not operate unit when you are tired, ill, up- set, or if you are under the influence of alco-

hol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is

mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store

fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel purposes.

D Do not smoke while handling fuel or while operating the unit.

D Make sure the unit is properly assembled and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills be-

fore starting engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

D Never start or run engine inside a closed room, building or other unventilated area. Breathing exhaust fumes can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive vapors or carbon monoxide build up could be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

DNever run unit without the proper equip- ment attached. When using your unit as a blower, always install blower tube.

D Check air intake opening and blower tubes, frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris which can accumulate and restrict proper air flow and cause damage to the unit.

DNever use for spreading chemicals, fertil- izers, or other substances which may con-

tain toxic materials.

DTo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

D Have all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho- rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

-- 2 --

Page 2
Image 2
Weed Eater 530088117 instruction manual Know Your Unit, Plan Ahead, Handle Fuel with CAUTION, IT is Highly Flammable

530088117 specifications

The Weed Eater 530088117 is a versatile and robust tool designed for homeowners and landscaping professionals alike. Known for its efficiency and performance, this weed eater combines modern technology with user-friendly features, making yard maintenance tasks easier and more enjoyable.

One of the standout features of the Weed Eater 530088117 is its powerful engine. Equipped with a high-performance 25cc 2-cycle engine, this model provides the necessary power to tackle tough weeds and thick grass with ease. The engine is designed for optimum fuel efficiency, ensuring that users can work longer without frequent refueling, which is especially useful for larger yards.

The design of the Weed Eater 530088117 emphasizes user comfort and convenience. It comes with an adjustable handle, allowing users to customize the grip to suit their height and preferences. This feature helps reduce fatigue during extended use. Additionally, the tool is lightweight, making it easier to maneuver around tight spaces and intricate landscapes.

A key technological advantage of the Weed Eater 530088117 is its advanced bump feed line system. This innovative feature allows users to easily advance the cutting line with a simple tap on the ground. This ensures that the user always has a fresh length of line ready to tackle any job, without the hassle of constantly stopping to adjust the line manually.

The dual-line cutting head enhances the efficiency of the weed eater, allowing for a wider cutting path. This not only saves time but also delivers a cleaner cut, which results in a more manicured lawn. The plastic housing of the cutting head is designed for durability while also being lightweight, reducing the strain on the user.

Furthermore, the Weed Eater 530088117 is equipped with a protective guard that shields users from flying debris while cutting. This safety feature gives users peace of mind, knowing they can work effectively without compromising their safety.

In summary, the Weed Eater 530088117 is a powerful, user-friendly, and efficient tool for maintaining lawns and gardens. With its strong engine, adjustable handle, advanced line feeding technology, and safety features, this weed eater stands out in its category, making it a valuable addition to any landscaping toolkit. Whether tackling overgrown areas or fine-tuning edges, the Weed Eater 530088117 delivers reliable performance to help achieve a beautifully maintained yard.