Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

The trimmer line will advance approximately 2 in. (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

The most efficient line length is the maximum length allowed by the line limiter.Always keep the shield in place when the tool is being oper- ated.

To advance line:

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above

the grassy area.

STap the bottom of the trimmer head lightly on the ground one time. Approximately 2 in. (5 cm) of line will be advanced with each

tap.

Always tap the trimmer head on a grassy area. Tapping on surfaces such as concrete or asphalt can cause excessive wear to the trimmer head.

If the line is worn down to 2 inches (5 cm) or less, more than one tap will be required to ob- tain the most efficient line length.

WARNING: Use only 0.080! (2 mm) diameter line. Other sizes of line will not ad- vance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

CUTTING METHODS

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and minimum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

S The line will easily remove grass and weeds from around walls, fences, trees and

flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can

wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

SCALPING -- The scalping technique re- moves unwanted vegetation. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

6

Page 5 Page 7
Page 6
Image 6
Weed Eater 530163507 instruction manual Trimmer Line Advance, Cutting Methods
Page 5 Page 7

530163507 specifications

The Weed Eater 530163507 is a remarkable string trimmer designed for both homeowners and landscape professionals looking to maintain a pristine garden or yard. Boasting a combination of lightweight design and powerful performance, this trimmer stands out in the competitive landscaping market.

One of the main features of the Weed Eater 530163507 is its robust 25cc two-cycle engine. This engine provides the necessary power for trimming through tough grass and weeds, making it an ideal choice for tackling overgrown areas. The engine is designed to deliver efficient fuel consumption, allowing users to work longer hours without the need for constant refueling, thus enhancing productivity.

The trimmer features a unique bump feed line advancement system, which allows for easy and quick line replacement during operation. By simply tapping the trimmer head on the ground, users can release more line without needing to stop their workflow. This feature is especially invaluable when working in large areas or for extended periods, as it minimizes interruptions.

Comfort and ease of use are also prioritized in the design of the Weed Eater 530163507. It comes equipped with an adjustable handle that allows users to customize the trimmer's height and angle according to their preference. This enhances control and maneuverability, making it easier to reach those tricky spots around flower beds and trees. The cushioned grip further adds to operator comfort, reducing fatigue during prolonged use.

Safety features are integrated into the design of the trimmer, including a protective guard that shields the user from flying debris. Additionally, the lightweight construction makes it easy to carry and operate, reducing the strain on the arms and back.

In terms of technology, the Weed Eater 530163507 incorporates advanced engineering to create a reliable and durable tool. The trimmer is built to resist wear and tear, ensuring longevity despite regular use. Its effective vibration-dampening system minimizes operator discomfort, allowing for a smoother, more enjoyable trimming experience.

In summary, the Weed Eater 530163507 is a well-rounded string trimmer that combines power, efficiency, and user comfort. Whether you are a weekend warrior tending to your garden or a professional landscaper maintaining various properties, this trimmer offers the features and performance needed to achieve excellent results. Experience the ease and efficiency of maintaining your outdoor spaces with this quality tool.
Top Page Image Contents