Engine Choke Lever

ON/OFF

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to the FULL CHOKE position.

5.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

 

Choke

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lever

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Muffler

Primer Bulb

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trig- ger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull start- er rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554--6723.

OPERATING POSITION

6.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

8.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

Cut from your left to your right.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

5

Page 5
Image 5
Weed Eater 530163507 HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine, Operating Position

530163507 specifications

The Weed Eater 530163507 is a remarkable string trimmer designed for both homeowners and landscape professionals looking to maintain a pristine garden or yard. Boasting a combination of lightweight design and powerful performance, this trimmer stands out in the competitive landscaping market.

One of the main features of the Weed Eater 530163507 is its robust 25cc two-cycle engine. This engine provides the necessary power for trimming through tough grass and weeds, making it an ideal choice for tackling overgrown areas. The engine is designed to deliver efficient fuel consumption, allowing users to work longer hours without the need for constant refueling, thus enhancing productivity.

The trimmer features a unique bump feed line advancement system, which allows for easy and quick line replacement during operation. By simply tapping the trimmer head on the ground, users can release more line without needing to stop their workflow. This feature is especially invaluable when working in large areas or for extended periods, as it minimizes interruptions.

Comfort and ease of use are also prioritized in the design of the Weed Eater 530163507. It comes equipped with an adjustable handle that allows users to customize the trimmer's height and angle according to their preference. This enhances control and maneuverability, making it easier to reach those tricky spots around flower beds and trees. The cushioned grip further adds to operator comfort, reducing fatigue during prolonged use.

Safety features are integrated into the design of the trimmer, including a protective guard that shields the user from flying debris. Additionally, the lightweight construction makes it easy to carry and operate, reducing the strain on the arms and back.

In terms of technology, the Weed Eater 530163507 incorporates advanced engineering to create a reliable and durable tool. The trimmer is built to resist wear and tear, ensuring longevity despite regular use. Its effective vibration-dampening system minimizes operator discomfort, allowing for a smoother, more enjoyable trimming experience.

In summary, the Weed Eater 530163507 is a well-rounded string trimmer that combines power, efficiency, and user comfort. Whether you are a weekend warrior tending to your garden or a professional landscaper maintaining various properties, this trimmer offers the features and performance needed to achieve excellent results. Experience the ease and efficiency of maintaining your outdoor spaces with this quality tool.