Weed Eater 530164008 instruction manual Safety Rules

Models: 530164008

1 9
Download 9 pages 14.08 Kb
Page 2
Image 2

SAFETY RULES

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your instruction manual carefully until

you completely understand and can follow all warnings and safety rules before operat- ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

Use your unit as a blower for:

D Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.

S Blowing grass clippings, straw, or leaves into piles, around joints, or between bricks.

PLAN AHEAD

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec-

tion should be marked Z87.

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when

working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or clothing

with loosely hanging straps, ties, tassels, etc. They can be caught in moving parts.

DDo not operate unit when you are tired, ill, up-

set, or if you are under the influence of alco- hol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel

purposes.

DDo not smoke while handling fuel or while operating the unit.

DMake sure the unit is properly assembled

and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills be-

fore starting engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

DNever start or run engine inside a closed room, building or other unventilated area. Breathing exhaust fumes can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive

vapors or carbon monoxide build up could be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance

at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

D Never run unit without the proper equip- ment attached. When using your unit as a blower, always install blower tube.

DCheck air intake opening and blower tubes, frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris which can accumulate and restrict proper air flow and

cause damage to the unit.

DNever use for spreading chemicals, fertiliz- ers, or other substances which may contain

toxic materials.

DTo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

DHave all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho-

rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

-- 2 --

Page 2
Image 2
Weed Eater 530164008 instruction manual Safety Rules

530164008 specifications

The Weed Eater 530164008 is an essential tool for gardeners and landscapers seeking a reliable and efficient solution for maintaining their outdoor spaces. This trimmer stands out with its well-balanced design and powerful performance, making it an excellent choice for both residential and commercial use.

One of the key features of the Weed Eater 530164008 is its lightweight construction. Weighing significantly less than many traditional gas trimmers, this model allows users to maneuver effortlessly around gardens, flower beds, and hard-to-reach areas without experiencing fatigue. The ergonomic handle design further enhances comfort, ensuring users can work longer without straining their hands or wrists.

Power is where the Weed Eater 530164008 shines. Equipped with a robust engine, this trimmer delivers exceptional cutting performance that can tackle thick grass and stubborn weeds alike. The engine’s design promotes fuel efficiency, allowing users to get more work done on a single tank. This efficiency not only saves time but also reduces the frequency of refueling during larger projects.

A notable technology integrated into the Weed Eater 530164008 is its auto-feed spool system. This innovative feature ensures that the cutting line is always at the optimal length, allowing for continuous and uninterrupted trimming. When the line breaks or becomes too short, the auto-feed system automatically adjusts the line length, thus eliminating the need for manual rewinding and enhancing productivity.

In terms of versatility, the Weed Eater 530164008 is equipped with multiple cutting options, including standard line trimming and the option to attach different blades for tougher jobs. This adaptability makes it an invaluable tool for a variety of tasks, from trimming edges to clearing dense brush.

Durability is another hallmark of the Weed Eater 530164008. Constructed with high-quality materials, this trimmer is designed to withstand the rigors of frequent use. The reliable build ensures that users can count on it for years to come, making it a sound investment for anyone looking to keep their outdoor areas tidy.

In conclusion, the Weed Eater 530164008 is a powerful, user-friendly, and versatile trimmer that excels in performance and convenience. Its lightweight design, efficient engine, innovative features, and robust construction make it a top choice for anyone serious about maintaining their lawn and garden. Whether you are a homeowner or a professional landscaper, this trimmer offers the tools and performance needed to achieve those perfectly manicured outdoor spaces.