STORAGE

WARNING: Perform the following steps after each use.

S Stop the unit and disconnect the power source when not in use.

SCarry the unit with motor stopped.

SStore the unit so the line limiter blade can- not cause injury.

SStore unit and extension cord indoors in a high, dry place out of the reach of children.

Store unit unplugged.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that require unit to be operating.

TROUBLE

CAUSE

REMEDY

Trimmer head

1.

Crowding trimmer line

1.

Allow tip of line to do the cutting.

stops under a

 

against material being

 

 

load or does not

 

cut.

2.

Contact your authorized service dealer.

turn when switch

2.

Electrical failure.

is pressed.

3.

Thrown circuit breaker.

3.

Check Breaker Box.

 

4.

Debris stopping head.

4.

Remove debris.

 

 

 

 

 

Line does not

1.

Line improperly routed

1.

Check line routing.

advance or

 

in head.

 

 

breaks while

2.

Line improperly

2.

Rewind line tightly and evenly.

cutting.

 

wound into spool.

3.

Use only 0.065 in. (1.65 mm) dia. line.

 

3.

Incorrect line size

 

4.

Not enough line

4.

Remove cover and pull 4 inches

 

 

outside of head.

 

(10 cm) of line out of head.

 

5.

Dirt buildup on unit.

5.

Clean unit.

Line welds onto

1.

Line size is incorrect.

1. Use only 0.065 in. (1.65 mm) dia. line.

spool.

2.

Incorrect spool.

2. Replace with correct spool.

 

3.

Line is being crowded

3. Cut with tip of line fully extended.

 

 

against material being

 

 

 

 

cut.

 

 

Line releases

1.

Line improperly

1. Check line routing.

continuously.

 

routed in head.

 

 

 

2.

Spool damaged.

2. Replace spool.

Line usage is

1.

Line improperly routed

1. Check line routing.

excessive.

 

in head.

 

 

 

2.

Line size is incorrect.

2. Replace spool.

 

3.

Crowding line against

3. Cut with tip of line fully extended.

 

 

material being cut.

4. Replace spool.

 

4.

Spool worn or damaged.

 

 

 

Line pulls back

1. Too little line outside

1. Remove cover and pull 4 inches

into head.

 

of head.

 

(10 cm) of line outside of head.

 

2. Line size incorrect.

2. Use only 0.065 in. (1.65 mm) dia. line.

8

Page 7 Page 9
Page 8
Image 8
Weed Eater 545117526 instruction manual Storage, Troubleshooting Table Cause Remedy
Page 7 Page 9

545117526 specifications

The Weed Eater 545117526 is an innovative and efficient string trimmer designed for both residential and professional landscaping use. This powerful tool combines cutting-edge technology with user-friendly features, making it an essential addition to your gardening arsenal.

One of the standout characteristics of the Weed Eater 545117526 is its robust engine. Powered by a reliable two-stroke engine, this trimmer delivers impressive performance, enabling users to tackle thick grass and stubborn weeds with ease. The engine is engineered for efficiency, providing ample power while minimizing fuel consumption and emissions, which is a significant advantage for environmentally-conscious users.

The lightweight design of the Weed Eater 545117526 enhances its maneuverability. Weighing in at just around 10 pounds, it allows users to handle the trimmer for extended periods without experiencing fatigue. The adjustable handle provides added comfort and control, ensuring that you can navigate around landscaping obstacles efficiently.

The trimmer features a dual-line feed system that allows for quick and simple line reloads. This system is designed to save time and improve productivity, as users can easily re-thread the line without needing to disassemble the trimmer. The 0.095-inch cutting line is robust enough to slice through tough vegetation while maintaining a clean cut, providing a professional finish to any lawn.

Moreover, the Weed Eater 545117526 incorporates anti-vibration technology, reducing the fatigue associated with prolonged use. This feature enhances user comfort and control, making it easier to achieve precise cuts without straining the hands and arms.

In terms of durability, this trimmer is built with high-quality materials that withstand the rigors of outdoor use. The tough plastic housing protects the internal components from damage, while the ergonomic design ensures that it remains balanced during operation.

Overall, the Weed Eater 545117526 is a powerful and versatile tool that caters to the needs of both home gardeners and professional landscapers. Its combination of a robust engine, lightweight design, and user-friendly features makes it an ideal choice for anyone looking to maintain their outdoor space efficiently. Whether trimming grass edges or tackling unruly weeds, this trimmer is poised to deliver exceptional results with ease.
Top Page Image Contents