OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
| Trigger Switch |
Cord |
|
Retainer | Assist Handle |
| Recessed |
| Plug |
Motor Housing
Air Vents |
| |
| Trimmer Head | |
Debris Shield | with 0.065 in. | |
Trimmer Line | ||
| ||
| Tap Button | |
Line Limiter Blade |
|
RECESSED PLUG
The RECESSED PLUG is where you attach your extension cord to the unit.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance the cutting line during operation and to remove the spool during line replacement.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord | Gauge | |
25 | Ft. (7.5 m) | 18 Gauge |
50 | Ft. (15 m) | 16 Gauge |
100 Ft. (30 m) | 16 Gauge | |
|
|
|
Extension cords are available for this unit.
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the handle and around the hook as shown. Insure the plug and cord are firmly and fully engaged.
Cord Retainer
Extension Cord
5
