Groove

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

WARNING: Keep hands and fingers away from the trigger switch to avoid acciden- tal starting during service.

1.Press and hold in the two cap release latches.

2.Pull cap away from the hub.

 

Cap

 

Cap

Spool

release

latch

 

Hub

Eyelet

3.Remove old spool.

4.Clean entire surface of hub and spool.

5.Replace with a pre--wound spool or cut a length of 26 feet (8 meters) of 0.065(1.65 mm) diameter WEED EATER brand line. Use of heavier lines could overload and damage unit.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

6.Insert end of line about 1/2 inch (1 cm) into small hole on the inside of the spool.

7.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

8.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

Notches

9.Place spool into hub with cut out area of spool in line with eyelet (see illustration).

Cut out

area of spool

Eyelet

10.Remove line from notch and feed line through eyelet.

11.Reinstall the spool cap.

12

Page 12
Image 12
Weed Eater 545186757 instruction manual Service and Adjustments, Replacing the Line, Groove

545186757 specifications

The Weed Eater 545186757 is a robust and reliable solution for homeowners and landscaping professionals looking to maintain their lawns and gardens. Known for its powerful performance and user-friendly design, this weed eater is equipped with a range of features and technologies designed to enhance efficiency and ease of use.

One of the standout features of the Weed Eater 545186757 is its lightweight construction, making it easy to maneuver even in tight spaces. Weighing in at just under eight pounds, it minimizes fatigue during extended use, allowing users to tackle larger areas without discomfort. This is particularly beneficial for those who may face physical limitations or simply prefer a lighter tool for their gardening tasks.

Equipped with a reliable 2-stroke engine, this weed eater provides superior performance, delivering consistent power to tackle tough weeds and overgrown grass. The engine is designed for easy starting, with a simple pull-to-start mechanism that eliminates the frustration often encountered with other models. This ensures that users can get to work quickly without spending precious time wrestling with machinery.

In addition to its powerful engine, the Weed Eater 545186757 features a bump head line feed system that simplifies the process of replacing trimming line. With a simple bump of the head against the ground, users can release more line without needing to stop and manually feed it, significantly increasing productivity. The dual line design further enhances cutting efficiency, allowing for a wider cutting swath, enabling users to finish their tasks faster.

The ergonomic design of the handle is another key characteristic of the Weed Eater 545186757. The padded grip ensures comfort during use, while the adjustable control handle allows users to customize their grip for better control and precision. This adjustability is particularly useful for users of varying heights and preferences, promoting a more enjoyable and effective experience.

Finally, the Weed Eater 545186757 is built for durability. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. Whether you are maintaining a small garden or managing a larger property, this weed eater is up to the challenge, proving to be a valuable addition to any homeowner's toolkit. With its combination of power, versatility, and user-centric design, the Weed Eater 545186757 stands out as a go-to choice for effective lawn care.