Weed Eater 545186757 User Replaceable Service Parts, Troubleshooting Table Cause Remedy

Models: 545186757

1 14
Download 14 pages 7.45 Kb
Page 13
Image 13

USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART

SERVICE PART NUMBER

Spool with 0.065Trimmer Line

545124406

Spool Cap

545124417

Assist Handle

545124407

Wheel

545124409

Battery (authorized distributor replacement item)

545124412

Charger GPE182--120120--1

525802301

Wall Mount Bracket

545124411

STORAGE

WARNING: Perform the following steps after each use.

SStop the unit and place in wall bracket for storage and battery charging.

SCarry the unit with motor stopped.

S Store unit in a high, dry place out of the reach of children.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

TROUBLESHOOTING TABLE

WARNING: Always stop unit before performing all of the recommended remedies be- low except remedies that require unit to be operating. Keep hands and fingers away from the trigger switch to avoid accidental starting.

TROUBLE

CAUSE

REMEDY

Trimmer head

1.

Crowding trimmer line

stops under a

 

against material being

load or does not

 

cut.

turn when switch

2.

Battery needs charging.

is pressed.

3.

Debris stopping head.

Line does not

1.

Line improperly routed

advance, line is

 

in head.

too short, or

2.

Line improperly

trimmer vibrates.

 

wound into spool.

 

3.

Incorrect line size

 

4.

Not enough line

 

 

outside of head.

 

5.

Manual line feed not

 

 

working.

 

6.

Dirt buildup on unit.

Excessive noise

1.

Motor has not reached

when unit is run-

 

full speed before use.

ning.

2.

Too much line has been

 

 

released from the spool.

 

3.

Line limiter pin missing

 

 

from shield.

1.Allow tip of line to do the cutting.

2.Charge battery.

3.Remove debris.

1.Check line routing.

2.Rewind line tightly and evenly.

3.Use only 0.065 in. (1.65 mm) dia. line.

4.Remove spool cap and spool. Manually feed line. Reinstall cap and spool. See Automatic Line Feed System section.

5.Rewind line tightly and evenly. Check that line is in correct section of spool.

6.Clean unit.

1.Allow the motor to reach full speed before use.

2.Rewind line tightly and evenly. See Automatic Line Feed System section.

3.Contact your authorized service dealer.

 

Line releases

1. Line improperly

1. Check line routing.

 

continuously.

 

routed in head.

 

 

 

 

2.

Spool damaged.

2. Replace spool.

 

 

 

 

 

 

 

Line usage is

1.

Line improperly routed

1.

Check line routing.

 

excessive.

 

in head.

 

 

 

 

2.

Line size is incorrect.

2.

Replace spool.

 

 

3.

Crowding line against

3.

Cut with tip of line fully extended.

 

 

 

material being cut.

4.

Replace spool.

 

 

4.

Spool worn or damaged.

 

Wheel stops

1.

Dirt or debris buildup

1. Clean wheel and groove on motor

 

turning.

 

on wheel or in groove.

 

housing (see Maintenance section).

13

Page 13
Image 13
Weed Eater 545186757 instruction manual User Replaceable Service Parts, Troubleshooting Table Cause Remedy

545186757 specifications

The Weed Eater 545186757 is a robust and reliable solution for homeowners and landscaping professionals looking to maintain their lawns and gardens. Known for its powerful performance and user-friendly design, this weed eater is equipped with a range of features and technologies designed to enhance efficiency and ease of use.

One of the standout features of the Weed Eater 545186757 is its lightweight construction, making it easy to maneuver even in tight spaces. Weighing in at just under eight pounds, it minimizes fatigue during extended use, allowing users to tackle larger areas without discomfort. This is particularly beneficial for those who may face physical limitations or simply prefer a lighter tool for their gardening tasks.

Equipped with a reliable 2-stroke engine, this weed eater provides superior performance, delivering consistent power to tackle tough weeds and overgrown grass. The engine is designed for easy starting, with a simple pull-to-start mechanism that eliminates the frustration often encountered with other models. This ensures that users can get to work quickly without spending precious time wrestling with machinery.

In addition to its powerful engine, the Weed Eater 545186757 features a bump head line feed system that simplifies the process of replacing trimming line. With a simple bump of the head against the ground, users can release more line without needing to stop and manually feed it, significantly increasing productivity. The dual line design further enhances cutting efficiency, allowing for a wider cutting swath, enabling users to finish their tasks faster.

The ergonomic design of the handle is another key characteristic of the Weed Eater 545186757. The padded grip ensures comfort during use, while the adjustable control handle allows users to customize their grip for better control and precision. This adjustability is particularly useful for users of varying heights and preferences, promoting a more enjoyable and effective experience.

Finally, the Weed Eater 545186757 is built for durability. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. Whether you are maintaining a small garden or managing a larger property, this weed eater is up to the challenge, proving to be a valuable addition to any homeowner's toolkit. With its combination of power, versatility, and user-centric design, the Weed Eater 545186757 stands out as a go-to choice for effective lawn care.