Manual Line Feed Button, Latch, Hub Eyelet

Manual Line

Feed Button

SWhen the required amount of line is fed out, gently pull on the second line (there is no

need to press the manual line feed button again).

SIf the line extends past the line limiter blade, too much line has been fed out. If too much line is fed out, remove the spool cap and click spool counterclockwise until the line is at the desired length.

To remove spool cap:

1.Press and hold in the two cap release latches.

2.Pull cap away from the hub.

		Cap
		Cap
	Spool	release
	Spool	latch
		latch

Hub

Eyelet

TRIMMING

Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an an- gle. Allow only the tip of the line to make con- tact. Do not force trimmer line into work area.

Trimming

3 in. (8 cm) above ground

SCALPING

The scalping technique removes unwanted vegetation down to the ground. Hold the bot- tom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

Scalping

MOWING

Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and dam- age the tool.

Mowing

To reinstall spool cap:

1.Keep all areas of the cap and hub clean. Failure to do so may prevent the cap be- ing securely located in the hub.

2.Replace the cap, pressing firmly down to- wards the hub to ensure cap is fully se- cured.

3.Check that the cap is secure by trying to remove it without pressing the two latches.

WARNING: Use only 0.065 inch (1.65

mm)diameter line. Other sizes of line will not ad- vance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause se- rious injury. See page 3 for warning concerning other cutting devices.

SWEEPING

The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

952711894 specifications

The Weed Eater 952711894 is a versatile and powerful string trimmer designed for both residential and commercial use. With its focus on performance, ease of use, and durability, this tool has become a favorite among landscapers and homeowners alike.

One of the standout features of the Weed Eater 952711894 is its lightweight design. Weighing in at just under 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended use. The ergonomic handle provides a comfortable grip, enabling precise control for trimming around delicate flower beds, fences, and other obstacles.

Powering the Weed Eater 952711894 is a robust 25cc 2-stroke engine. This engine delivers reliable performance, making light work of tough weeds and thick grass. The easy-start technology ensures that users can quickly start the trimmer without any hassle, enhancing overall productivity.

The trimmer is equipped with a dual-line bump head, allowing for quick and easy line replacement. This feature not only saves time but also ensures that users can maintain cutting efficiency throughout their trimming tasks. The dual lines provide a wider cutting path, further enhancing productivity and allowing for faster work completion in larger areas.

Another notable characteristic of the Weed Eater 952711894 is its adjustable telescoping shaft. This feature allows users to customize the trimmer's length to their preference, making it suitable for users of varying heights. The adjustable shaft also aids in reaching tight spaces and difficult angles, enhancing overall versatility.

For added convenience, the Weed Eater 952711894 includes a protective guard that helps to shield the user from debris while trimming. This feature promotes safer operation by minimizing the risk of injury from flying grass clippings and other materials.

In terms of maintenance, the trimmer is designed for easy access to the engine and other components, simplifying routine care and upkeep. Users can quickly check and replace the spark plug, air filter, and fuel lines, ensuring that the trimmer operates at peak performance throughout its lifespan.

Overall, the Weed Eater 952711894 combines power, efficiency, and user-friendly features. Whether tackling a small residential lawn or managing a larger landscaped area, this trimmer is equipped to deliver excellent results, making it a worthy addition to any gardening toolkit.

Weed Eater 952711894 Manual Line Feed Button, Need to press the manual line feed button again

Models: 952711894