WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by your authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Page 7
Image 7
Weed Eater 530163513, FL25 LE Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts, Clean AIR Filter
Page 6 Page 8

530163513, FL25 LE specifications

The Weed Eater FL25 LE, model number 530163513, is designed for homeowners seeking an efficient and reliable solution for trimming and maintaining their lawns and gardens. This lightweight yet powerful gas-powered string trimmer stands out with its user-friendly features and advanced technology that make yard work a breeze.

One of the primary features of the Weed Eater FL25 LE is its 25cc 2-cycle engine. This robust engine provides ample power to handle various trimming tasks, from edging flower beds to tackling thick grass and weeds. The 2-cycle design means it’s lightweight, allowing for easy maneuverability during prolonged use without causing fatigue.

The trimmer comes equipped with a dual-line bump head, which automatically feeds the cutting line as you work. This innovative design eliminates the hassle of stopping to adjust the line manually, allowing for uninterrupted mowing. The 0.095-inch line has been specifically chosen for its durability and efficiency, ensuring a clean cut every time.

Another highlight of the FL25 LE is its straight shaft design, which extends the reach of the user. This feature is especially beneficial for trimming hard-to-reach areas, such as under bushes and along fences. The straight shaft also provides better balance and control, making it easier to navigate around obstacles.

In terms of ergonomics, the trimmer includes an adjustable handle that can be customized to the operator's preference. This adjustability ensures a comfortable grip and reduces strain on the wrist during extended use. Additionally, the lightweight construction further enhances comfort, making it a suitable choice for users of all physical abilities.

The FL25 LE is also designed with easy maintenance in mind. The air filter is easily accessible, ensuring that it can be cleaned and replaced when necessary to maintain optimal performance. Routine maintenance is essential for prolonging the lifespan of any power equipment, and the Weed Eater’s design facilitates this process.

Overall, the Weed Eater FL25 LE, 530163513, is a versatile and efficient tool ideal for maintaining a well-groomed yard. Its powerful engine, user-friendly features, and ergonomic design make it a preferred choice for homeowners who want a reliable trimmer that can handle a variety of tasks with ease. Whether you are a seasoned gardener or a new homeowner, this trimmer will assist you in achieving a professional-looking landscape.
Top Page Image Contents