Align Installation Arrows

Tools built with this insulation system are not intended to be grounded. No ground- ing means is provided on this unit, nor should a means of grounding be added to this unit. As a result, the extension cord used with your unit can be plugged into any standard 120 volt electrical out- let.

Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury resulting from an internal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, mo- tor, etc., must be diagnosed and repaired by qualified service personnel. Replace- ment parts for a double insulated ap- pliance must be recommended by the manufacturer. A double insulated ap- pliance is marked with the words “double insulation” or “double insulated.” the symbol (square within a square) may also be marked on the appliance. Failure to have the unit repaired by qualified ser- vice personnel can cause the double in- sulation construction to become ineffec- tive and result in serious injury.

SAVE THESE INSTRUCTIONS

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled. Follow all safety information in the manual and on unit.

WARNING: The shield must be properly installed. The shield provides partial protection from the risk of thrown objects to the operator and others. Your unit is equipped with a line limiter blade, which cuts excess line to the proper length while running. The line limiter blade (on underside of shield) is sharp and can cut you.

NOTE: If shield is not properly installed, damage to unit (including motor failure) will result.

Twist shield in

direction of arrow to assemble

CAUTION: Sharp line limiter blade

Place handle in comfortable position and tighten securely.

NOTE: SG & XT units are equipped with an extendable tube. Extend the tube until it snaps into place. Without the tube fully extended the Twist ’N Edge feature on the XT series will not operate.

Extendable tube (Some models)

CAUTION: The tube must be fully ex- tended for the unit to operate correctly.

Use only a voltage supply as specified on your unit.

SELECT AN EXTENSION CORD

Extension Cord Gauge Chart

Length of Cord		Gauge

25	Ft. (7.5 m)	18 Gauge
50	Ft. (15 m)	16 Gauge
100 Ft. (30 m)		16 Gauge

Extension cords are available for this unit.

ATTACH THE EXTENSION

CORD TO YOUR TRIMMER

Loop your extension cord through the handle and around the hook. Insure the plug and cord are firmly and fully en- gaged.

530084129, TE35, TE12 specifications

When it comes to tackling overgrown lawns and gardens, few tools stand out quite like the Weed Eater lineup, particularly the TE12 and TE35 models, alongside parts like the 530084129 attachment. These electric trimmers are designed for efficiency, usability, and durability, making them indispensable for homeowners and landscaping professionals alike.

Starting with the TE12, this model is lightweight and user-friendly, with an ergonomic design that allows for extended use without causing fatigue. Weighing in at approximately 4.6 pounds, it is easy to maneuver, making it ideal for reaching tight spaces, corners, and steep areas in your yard. The TE12 features a corded electric design, which means you can rely on consistent power without the worry of battery life. Its 12-inch cutting width enables efficient trimming of grass and weeds, allowing users to complete tasks quickly.

Transitioning to the TE35, this trimmer elevates performance with a more powerful motor designed for tougher jobs. With a cutting width of 14 inches, it allows for greater coverage in shorter time frames. The TE35 also integrates a simple line-feed system, making it easy to replace trimmer line without complicated processes. Additionally, its adjustable handle offers better control and comfort, accommodating users of different heights and preferences.

The impact of the 530084129 attachment cannot be overlooked. This specific part enhances the usability of Weed Eater products, providing options for different types of cutting tasks. The versatility of this attachment means users can switch from basic trimming to more detailed edging or even heavier-duty cutting with ease.

Both models utilize advanced motor technology, ensuring efficient operation. The maintenance on these trimmers is minimal, thanks to easy-access features that prevent clogging and simplify cleaning processes.

In summary, the Weed Eater TE12 and TE35, along with the 530084129 attachment, encapsulate the perfect blend of power, efficiency, and versatility. These models are thoughtfully engineered for both novice users and professional landscapers, making yard maintenance a simpler and more enjoyable task. Whether you are tidying up your garden or maintaining expansive lawns, the Weed Eater series stands out as a reliable choice for all your trimming needs.

Weed Eater TE35, TE12, 530084129 Align Installation Arrows, Select AN Extension Cord

Models: 530084129 TE35 TE12