OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor isequipped withan operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachmen!.clutch "control.

TO STOP MOWER BLADES - disengage attachment

clutch.control ....

.

I

CAUTION: Do not operate the mower ] without either the entire grass catcher, I on mowers so equipped, or the dis- charge guard in place.

"ENGAGE[}" POSITION

ATTACHMENT LIFT ,LEVER HIGH POSITION

_LOW

POSITION

CLUTCH LEVER

"DISENGAGED"

POSITION

ATTACHMENT_

TO TRANSPORT

Raiseattachmentlitttohighestpositionwithattachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than'five(5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and

secured to tractor. Use an appropriate means oftying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH-

MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 11)

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART" in the Customer Responsibilities section of this manual).

To change engine oil, see the Customer Responsibilities section in this manual.

DISCHARGE

GUARD

FIG. 6

TO OPERATE ON HILLS

with slopes greater than 15 °and do not

J & CAUTION: Donotdriveupordownhins I drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake

pedal quickly to brake position and engage parking brake.

Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

12

 

ADD GASOLINE

Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

IMPORTANT: WHEN OPERATING IN TEMPERATURES

BELOW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER

STARTING.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

]

CAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Page 12
Image 12
Weed Eater WE14542K owner manual Before Starting the Engine, To Transport, Ments, To Operate on Hills, ADD Gasoline

WE14542K specifications

The Weed Eater WE14542K is a robust and versatile string trimmer designed for homeowners and landscapers looking for an efficient and reliable tool to tackle overgrown grass and weeds. This powerful machine is engineered with various features and technologies that enhance its performance and usability.

One of the standout features of the WE14542K is its lightweight design. Weighing just around 10 pounds, it's easy to maneuver, reducing fatigue during extended use. This makes it ideal for homeowners who need to manage their lawns without the strain of handling heavier equipment. The compact size also ensures that storage is hassle-free, fitting easily in sheds or garages.

Powering the WE14542K is a reliable 14-amp motor that delivers impressive cutting power. The electric motor eliminates the need for gas, which contributes to a cleaner and quieter operation, making it perfect for residential neighborhoods where noise restrictions may apply. The electric trimmer provides consistent power without the hassle of mixing fuel or dealing with emissions, thus being more environmentally friendly.

The Weed Eater WE14542K features a 42-inch cutting width, allowing users to tackle larger areas with fewer passes. This efficiency is complemented by its adjustable head, which can be angled for precision edging and trimming capabilities. The trimmer is equipped with a dual-line system that effectively reduces the time spent tidying up the edges of lawns, pathways, and garden beds.

Ergonomics play a significant role in the design of the WE14542K. It comes with an adjustable handle that allows users to find the most comfortable grip and angle for their height and preference. This feature not only ensures better control but also minimizes user fatigue during long sessions of work.

For added convenience, the Weed Eater WE14542K is designed with a push-button feed system. This allows for quick line advancement without the need for manual handling, saving time and effort in maintaining the cutting line. Additionally, the trimmer is constructed with durable materials that withstand everyday wear and tear, ensuring longevity.

In summary, the Weed Eater WE14542K combines power, convenience, and user-friendly features to deliver a superior trimming experience. Its lightweight design, potent motor, adjustable functionality, and durable construction make it an excellent choice for anyone seeking to maintain their outdoor spaces with ease.