Replacing Battery See, Interlocks and Relays

SERVICE AND ADJUSTMENTS

POSITIVE TERMINAL	NEGATIVE	TERMINAL
	/	SEAT

BOX DOOR

POSITIVE	NEGATIVE
TERMINAL	4AL
	BATTERY

FIG. 24

•Connect one end of the BLACK cableto the NEGATIVE (-) terminal of fully charged battery.

•Connect the other end of the BLACK cable to good CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole inthe backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

REPLACING BATTERY (See Fig. 25 AND 26

&CAUTION: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

Lift seat pan to raised position and open battery box door.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely,

Con nect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut, Tighten securely. Close battery box door.

FIG. 25

KEPS

NUT"_

HEX

POSITIVE	(RED)
CABLE	(BLACK) CABLE

FIG. 26

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Checkwiring. See electrical wiring diagram inthe Repair Parts section.

TO REPLACE FUSE

Replace with 15amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY

(See Fig. 27)

•Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

• WIRE

.: CONNECTOR

__ __ • ,-

FIG. 27

WE14542K specifications

The Weed Eater WE14542K is a robust and versatile string trimmer designed for homeowners and landscapers looking for an efficient and reliable tool to tackle overgrown grass and weeds. This powerful machine is engineered with various features and technologies that enhance its performance and usability.

One of the standout features of the WE14542K is its lightweight design. Weighing just around 10 pounds, it's easy to maneuver, reducing fatigue during extended use. This makes it ideal for homeowners who need to manage their lawns without the strain of handling heavier equipment. The compact size also ensures that storage is hassle-free, fitting easily in sheds or garages.

Powering the WE14542K is a reliable 14-amp motor that delivers impressive cutting power. The electric motor eliminates the need for gas, which contributes to a cleaner and quieter operation, making it perfect for residential neighborhoods where noise restrictions may apply. The electric trimmer provides consistent power without the hassle of mixing fuel or dealing with emissions, thus being more environmentally friendly.

The Weed Eater WE14542K features a 42-inch cutting width, allowing users to tackle larger areas with fewer passes. This efficiency is complemented by its adjustable head, which can be angled for precision edging and trimming capabilities. The trimmer is equipped with a dual-line system that effectively reduces the time spent tidying up the edges of lawns, pathways, and garden beds.

Ergonomics play a significant role in the design of the WE14542K. It comes with an adjustable handle that allows users to find the most comfortable grip and angle for their height and preference. This feature not only ensures better control but also minimizes user fatigue during long sessions of work.

For added convenience, the Weed Eater WE14542K is designed with a push-button feed system. This allows for quick line advancement without the need for manual handling, saving time and effort in maintaining the cutting line. Additionally, the trimmer is constructed with durable materials that withstand everyday wear and tear, ensuring longevity.

In summary, the Weed Eater WE14542K combines power, convenience, and user-friendly features to deliver a superior trimming experience. Its lightweight design, potent motor, adjustable functionality, and durable construction make it an excellent choice for anyone seeking to maintain their outdoor spaces with ease.

Weed Eater WE14542K owner manual Replacing Battery See, Interlocks and Relays, To Replace Fuse

Models: WE14542K