![](/images/new-backgrounds/1230944/23094421x1.webp)
Notices
Environmental Operating Conditions & Physical Specifications
Use | Indoor |
Altitude | Up to 2000 meters |
Temperature Range | 10 o C to 40 o C |
Relative Humidity (max.) | 80% for temperatures up to 31o C decreasing linearly to 50% relative |
humidity as 40o C. | |
Weight | 10.6 pounds or 4.81 kilograms |
Dimensions (H x W x D) | 3.5”x 19”x 10.5” or 88.9 mm x 482.6 mm x 266.7 mm |
Input Power Rating |
Elevated Operating Ambient
If equipment is installed in a closed or
Reduced Air Flow
Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.
Mechanical Loading
Mounting of equipment in a rack should be such that a hazardous condition is not achieved due to uneven loading. This unit is not very heavy, but total rack loading should be considered.
Circuit Overloading
Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits could have on
Reliable Earthing
Reliable earthing of
Desktop Installation
To set up the DTV735 in a desktop environment, place it on a flat surface where it will not be subject to being hit or pushed, and will not have anything spilled or dropped on it. Also, the cables connected to the unit should be routed so they are not hit or pulled, which might cause damage to the connectors or to the unit itself. Additionally, there should be sufficient flow of cool air so the unit stays within its operating parameters.
Rack Installation
When installed in an equipment rack, it is best that the DTV735 be supported by angle brackets or cross supports. These should be screwed or bolted securely to the equipment rack, and be capable of supporting the unit and its connecting cables. Do NOT install the unit if you have doubts about the unit being safely supported. There are also 4 holes in the front brackets, which are designed to accept screws for further anchoring. It is also essential that these brackets be used so the unit cannot be moved forward and fall from the rack. It is always best to install the angle brackets or
Warranty
The following warranty applies to all Wegener Communications products. All Wegener Communications products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Wegener Communications' obligation under this warranty is limited to repairing or, at Wegener Communications' option, replacing parts, subassemblies, or entire assemblies. Wegener Communications shall not be liable for any special, indirect, or consequential damages. This warranty does not cover parts or equipment, which have been subject to misuse, negligence, or accident by the customer during use. All shipping costs for warranty repairs shall be prepaid by the customer. There are no other warranties, express or implied, except as stated herein.
Technical Support
In the event the unit fails to perform as described, contact Wegener Communications Customer Service at (770)
Corporate Office | Service Department |
Wegener | Wegener |
11350 Technology Circle | 359 Curie Drive |
Duluth, GA 30097 | Alpharetta, GA 30005 |
| Page 11 of 11 | May 24, 2003 |