3.Attach the Front Leg (8) to the Frame (2) with two M8 x 40mm Bolts (39), four M8 Washers (16), and two M8 Nylon Locknuts (17). Note: Do not tighten the Nylon Locknuts yet.
4.Attach the Frame (2) to the Crossbar (3) with two M8 x 55mm Bolts (18), the Support Plate (40), and two M8 Nylon Locknuts (17). Note: Do not tighten the Nylon Locknuts yet.
5.Tap two 30mm Square Inner Caps (22) into the ends of the Leg Lever (4).
Tap a 25mm Round Inner Cap (24) into the indi- cated end of the weight tube on the Leg Lever
(4). Tap the 25mm Round Angled Cap (20) onto the other end of the weight tube.
6.Lubricate the M10 x 60mm Bolt (32). Attach the Leg Lever (4) to the bracket on the Front Leg (8) with the Bolt and an M10 Nylon Locknut (33).
Note: Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.
3 |
|
|
|
39 |
|
|
|
|
|
| 2 |
16 |
|
| 16 |
|
|
| |
| 16 | 17 | |
|
|
| |
| 8 |
|
|
4 |
|
|
|
|
| 40 | 17 |
|
|
| |
18 |
|
|
|
|
|
| 3 |
2 | 18 |
|
|
|
|
| |
5 |
|
|
|
22 |
|
| 4 |
|
|
| |
|
|
| 20 |
24 |
|
|
|
Weight Tube |
| 22 | |
6 | Lubricate |
| |
32 |
| ||
4 |
|
|
|
|
|
| 33 |
|
| 8 |
|
6
