CABLE ASSEMBLY
12.Locate the Butterfly Cable (46). Attach the Butterfly Cable to the indicated Pivot Bracket (48) with an M8 x 27mm Shoulder Bolt (63) and an M8 Nylon Locknut (70).
13.Wrap the Butterfly Cable (46) around a
(39).Attach the Pulley and a Long Cable Trap
(40)to the bracket on the Front Upright (6) with an M10 x 55mm Bolt (69) and an M10 Nylon Locknut (71). Be sure the Cable Trap is turned to hold the Cable in the Groove of the Pulley.
14.Wrap the Butterfly Cable (46) around a 90mm Pulley (38). Attach the Pulley to the Double “U”- Bracket (37) with an M10 x 47mm Bolt (61) and an M10 Nylon Locknut (71).
15.Wrap the Butterfly Cable (46) around a
(39).Attach the Pulley and a Long Cable Trap
(40)to the bracket on the Front Upright (6) with an M10 x 55mm Bolt (69) and an M10 Nylon Locknut (71). Be sure the Cable Trap is turned to hold the Cable in the Groove of the Pulley.
12 |
|
| 70 |
| 46 |
| 63 |
| 48 |
13 |
|
| 6 |
| 71 |
| 39 |
| 40 |
| 69 |
| 46 |
14 |
|
| 46 |
| 38 |
| 61 |
| 37 |
| 71 |
15 | 69 |
| |
46 | 40 |
| |
| 39 |
| 6 |
| 71 |
9
