7. Press a 2" x 3" Inner Cap (58) into the top of the |
|
|
Squat Upright (4). Slide the Squat Upright onto the | 7 | _t58 |
|
|
two indicated5/16" x 2 1/2" Carriage Bolts(110) in the Long Base (120). Finger tighten a 5/16" Nylon Locknut (86) onto each Carriage Bolt. 0o not tight- en the Nylon Locknuts yet.
Press a 2" x 3" Inner Cap (58) into the top of the
Swivel Upright (5). Slide the Swivel Upright onto the two indicated5/16" x 2 1/2" Carriage Bolts (110) in the Long Base (120). Finger tighten a 5/16" Nyk_n
Locknut (86) onto each Carriage Bolt. Do not tight- en the Nylon Locknuta yet,
58
120
8. Press two Swivel Bushings(66) into the Swivel | 8 |
Carriage (46). | 66 |
"13ghtenan Adjustment Handle (65) into the Swivel |
| |
Carriage (46). Orient the Swivel Carriage as shown. |
| |
Slide the Carriage onto the Swivel Upright (5) and |
| |
engage the AdjustmentHandle into an adjustment | 65 | |
hole in the Swivel Upright. | ||
|
Adjustment Hole "_.