34.Remove the preattached 3 1/2” Pulleys (78) from the Double
Wrap the Butterfly Cable (69) under a 3 1/2” Pulley
(78).Attach the Pulley to the Double
(62)with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
35.Wrap the Butterfly Cable (69) over a
(87).Make sure that the Long Cable Trap is turned to hold the Cable in the groove of the Pulley.
36.Attach the Butterfly Cable (69) to the Pivot Bracket
(70)on the Right Butterfly Arm (26) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).
37.Locate the Leg Lever Cable (75), which is 98 1/2” long and has an eyelet on one end and a thread- ed pin on the other end. Route the eyelet end of the Cable through the Seat Upright (9) and attach it to the tab on the Leg Lever (10) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).
38.Attach a 3 1/2” Pulley (78) inside of the Seat Upright (9) with a 3/8” x 2 3/4” Bolt (101), two 3/8” Washers (91), two 1/2” Spacers (89), and a 3/8” Nylon Locknut (87), as shown.
15
34 |
|
|
|
|
| 69 |
|
|
| 78 |
|
| 93 | 87 |
|
| 62 |
|
|
35 | 18 |
|
|
|
|
| |
| 102 |
|
|
| 69 |
|
|
| 55 |
| 3 |
|
|
| |
|
|
| 87 |
36 | 103 | 69 |
|
|
| ||
| 70 |
|
|
| 26 | 86 |
|
|
|
| |
37 |
|
|
|
| 86 |
| 75 |
|
|
| |
|
|
| 9 |
| 10 |
|
|
| 103 |
|
|
38 |
|
|
|
| 91 89 | 78 | 75 |
| 87 | ||
|
|
| |
|
|
| 91 |
|
| 89 | 101 |
|
|
|
