![](/images/new-backgrounds/1147904/14790443x1.webp)
ADJUSTING THE CABLE TENSION
Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, the cables should be tightened.
See drawing A. Slack can be removed by moving the 3 1/2” Pulley (38) and Cable Trap (91) to a higher set of holes in a Double
Move the 3 1/2” Pulley (38) in the other Double “U”- Bracket (56) in the same manner.
See drawing B. Slack can be removed by moving the
3 1/2” Pulley (38) and the Cable Trap (91) to the higher set of holes in a
Move the 3 1/2” Pulley (38) in the other
See drawing B. Slack can also be removed from the cables by tightening the 1/4” Nylon Locknuts (65) attaching a cable to either
ADJUSTING THE LEG PRESS PLATE
To adjust the Leg Press Plate (31), remove the Leg Press Pin (87) from the Leg Press Frame (30) and the Adjustment Tube (88). Move the Tube to the desired position and secure it in place with the Pin. Be sure the Pin is turned to the locked position around the Leg Press Frame.
A |
|
|
|
|
| 56 |
|
91 |
| 56 |
|
|
|
| |
70 |
| 62 |
|
|
| 38 |
|
B |
|
|
|
| 74 |
| 79 |
|
| 85 | |
|
|
| |
70 |
|
|
|
65 |
|
|
|
38 |
|
|
|
62 |
|
|
|
74 |
|
|
|
|
| 79 |
|
|
| 30 | 31 |
|
|
|
22