11.Press the two Weight Guide Bushings (44) into the Center Top Frame (14). Slide the Center Top Frame onto the Weight Guides (20).

Attach the Center Top Frame (14) to the Right Top Frame (8) with two 5/16” x 2 3/4” Bolts (60), two 5/16” Washers (26), and two 5/16” Nylon Locknuts (71).

Attach the Center Top Frame (14) to the Left Top Frame (3) with two 5/16” x 2 3/4” Bolts (60), two 5/16” Washers (26), and two 5/16” Nylon Locknuts (71).

Tighten all of the 5/16” Nylon Locknuts (71) used in steps 3–11.

Note: The remaining hardware from the “Frame Assembly” bag will be used later.

ARM ASSEMBLY

12.Press a 1 1/2” Square Inner Cap (41) into the Right Upright (6). Press a 2” x 2 1/2” Inner Cap

(22)into the Butterfly Frame (9).

Lubricate a 3/8” x 3” Bolt (61) with grease. Attach the Butterfly Frame (9) to the Right Top Frame (8) with the Bolt and a 3/8” Nylon Locknut (70).Do not overtighten the Locknut; the Butterfly Frame must be able to pivot easily.

13.Lubricate a 3/8” x 2” Bolt (62) with grease. Attach the Pivot Bracket (48) to the Right Butterfly Arm (11) with the Bolt and a 3/8” Nylon Jamnut (50).

Do not overtighten the Locknut; the Pivot Bracket must be able to pivot easily.

Press a 1 1/2” x 2” Inner Cap (23) into the indicat- ed end of the Right Butterfly Arm (11). Wet the bottom end of the Arm with soapy water. Slide a Large Foam Pad (19) onto the Arm.

Slide a Foam Grip (76) onto a Press Handle (12). Press a 1” Round Inner Cap (24) into the end of the Handle. Attach the Handle to the Right Butterfly Arm (11) with two 5/16” x 3/4” Button Head Screws (64) and two Nut Clips (99).

Slide the Large Foam Pad (19) down so that the bottom of the Foam Pad is even with the bottom of the Right Butterfly Arm (11).

Repeat this step with the Left Butterfly Arm (10).

11

 

 

 

 

 

 

 

 

71

44

71

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

60

71

 

71

 

60

 

26

 

26

 

 

 

 

 

 

8

 

 

 

 

26

 

 

 

 

 

 

 

 

20

 

 

 

3

 

 

 

 

 

 

12

 

 

 

8

 

 

 

 

 

 

 

 

 

 

22

 

 

 

 

 

 

 

 

41

 

 

 

70

 

Lubricate

 

6

 

 

 

 

 

 

 

 

 

61

 

 

 

9

 

 

 

 

 

13

Lubricate

 

62

 

 

 

 

 

 

48

 

 

 

 

64

11

23

 

 

 

 

50

 

 

 

64

 

 

 

 

 

 

 

 

 

 

24

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

10

 

 

 

 

 

 

 

99

76

 

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

9

Page 9
Image 9
Weider 831.159823 Tighten all of the 5/16 Nylon Locknuts 71 used in steps, Repeat this step with the Left Butterfly Arm