ADJUSTING THE BACKREST
The Backrest (6) can be used in a decline position, a level position, or either of two incline positions. To adjust the Backrest to the decline position, remove the Adjustment Pin (32) and lower the Backrest until it rests directly on the Crossbar (3).
To adjust the Backrest (6) to the level position, insert the Adjustment Pin (32) through the top set of holes, and secure it with the Pin Clip (43).
To adjust the Backrest (6) to an incline position, insert the Adjustment Pin (32) as shown through one of the lower two sets of holes in the backrest adjustment tubes. Secure the Adjustment Pin with the Pin Clip (43).
WARNING: When adjusting the position of the seat, make sure that the adjustment pin is inserted through both adjustment tubes.
32 | 6 |
| |
| 3 |
| 43 |
| Adjustment Tubes |
10
