PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 18 of this manual. Note: Some small parts may have been
M10 x 45mm Bolt (18) | M10 x 80mm Bolt (22) | ||
|
| M10 x 20mm Bolt (21) | M8 x 70mm Bolt (25) |
M10 Washer (15) |
|
|
|
M8 Nylon Locknut | (28) | M10 Nylon Locknut (20) | M10 x 65mm Bolt (19) |
|
5