Weider WEBE27331 user manual

3.Attach two Bumpers (82) to the Front Stabilizer

(3) with two M4 x 13mm Screws (83).

Press two Bushings (34) into the Bench Frame

(2).

Attach the Bench Frame (2) to the Front Leg (4) with four M10 x 94mm Bolts (18), two Joint Plates (39), and four M10 Nylon Locknuts (32). Do not tighten the Locknuts yet.

4.Press four 20mm x 40mm Inner Caps (20) into the ends of the two Backrest Frames (6).

Attach the Backrest Frames (6) to the Backrest Bracket (9) with four M10 x 58mm Bolts (73), four M10 Washers (74), and four M10 Nylon Locknuts (32). Make sure the Backrest Frames are ori- ented as shown. The Backrest Frames must be parallel, with the indicated holes aligned.

5.Attach the Backrest (10) to the Backrest Frames

(6) with four M6 x 53mm Screws (29) and four M6 Washers (37). Note: If the four Screws cannot be inserted into the Backrest properly, go back to step 4 and readjust the Backrest Frames.

3
		39	2
	32	34
				34
	4
			39	18
	82
	83		3
		82
	83
4				73
		73
				20
		74
		74
	Holes	6
	20
		9
			32
5
		10
				6
				37
	37			29
	29

6