Detailed Service Procedures

Cleaning boiler flueways:

Make sure all electrical connections to boiler are turned off and wait until boiler is warm, not hot, before cleaning. Failure to do so will result in severe personal injury, death or substantial property damage.

1.Top flue boilers -remove breeching and jacket top panel.

Rear flue boilers - remove jacket top panel.

2.Remove flue collector hood, saving hardware for reassembly.

3.Shut off oil valves. Arrange drip pans under the areas of oil piping that will be discon- nected. Disconnect oil line at burner so that you can swing open the door completely.

4.Line combustion chamber floor with news- paper to catch any soot that will be loosened in the cleaning process.

5.Starting at the top of the boiler, use a wire flue brush to thoroughly clean between all pins at all angles. Be careful not to damage side walls of rear refractory.

6.Move to the bottom of the flueways and clean up between the sections to reach pins left uncleaned in step #5.

7.Once the flueways are cleaned, carefully remove the paper from the floor of the combustion chamber.

8.Verify sealing rope around flue area is intact. Visually check condition and position of insulation in combustion chamber floor, and the refractories at the rear of boiler and in the burner mounting door. Replace any parts as necessary.

9.Close burner mounting door and tighten nut securely. Place flue collector hood on top of boiler. Secure with hardware from step #2.

Maintain a gas-tight seal to avoid possible flue gas leakage and carbon monoxide emissions, which can lead to severe personal injury or death.

10.Check breeching for sooting and clean if necessary. Install jacket top panel and breeching.

11.Reconnect oil line and all electrical connec- tions.

.

Thoroughly clean flueways between all pins at all angles. Start on top of boiler, finish from the bottom.

Cleaning Boiler Flueways

Figure 3

9

Page 9
Image 9
Weil-McLain WGO manual Detailed Service Procedures, Cleaning boiler flueways

WGO specifications

The Weil-McLain WGO series is a line of oil-fired cast iron boilers designed to provide reliable performance and efficiency for residential and commercial heating. Known for their durability and longevity, the WGO boilers are a favorite among homeowners and contractors alike.

One of the main features of the WGO series is its rugged construction. These boilers are made from high-quality cast iron, which not only enhances the reliability of the unit but also contributes to efficient heat transfer. The cast iron design resists corrosion and provides excellent thermal mass, resulting in uniform heating and reduced fuel consumption.

The WGO boilers come with a standard efficiency of up to 87%, which makes them a cost-effective solution for heating needs. Equipped with a multiple-burner system, these boilers deliver consistent heat across various applications. The burners utilize advanced technology to optimize fuel combustion, contributing to lower emissions and higher efficiency.

In terms of features, the WGO series is designed for easy installation and maintenance. A front-access design allows for straightforward servicing, ensuring that routine checks and repairs can be conducted with minimal disruption. Moreover, Weil-McLain provides a robust warranty and a network of support to help homeowners and contractors maintain peak performance over the years.

Another characteristic of the WGO series is its adaptability. These boilers come in several sizes, making it easy to find the right fit for any space. From smaller homes to larger commercial settings, the WGO's flexibility makes it a versatile choice. Additionally, the series is compatible with a variety of heating systems, including hot water and steam systems.

Moreover, Weil-McLain integrates modern technologies into the WGO series, enhancing control and user comfort. The availability of advanced control systems allows for easier temperature adjustments and improved energy management. This integration leads not only to enhanced comfort but also to substantial savings on fuel costs over the life of the boiler.

In summary, the Weil-McLain WGO series stands out for its durable construction, efficient performance, and ease of maintenance. With advanced technology, excellent adaptability, and a commitment to reliability, the WGO boilers are a solid investment for anyone looking to enhance their heating systems. Regardless of the application, these boilers deliver the comfort and performance necessary to meet demanding heating needs.