ASSEMBLY

 

 

 

 

 

 

 

4. Attach Upper Post (F) to Lower Post (H) by screwing the two pieces of the post

 

 

 

4

 

 

together.

 

 

 

 

 

 

 

5

5.Place Tank Housing (D) onto Base (J). Slide Tank Housing (D) over the assembled Upper/Lower Post and down over the Post Supports. Rest Tank Housing on Base.

6. Attach Head Assembly (C) to Upper Post (F).

6

 

Note: There is a small piece of protective foam located in the

 

 

neck of the Head Assembly that MUST be removed prior to

 

 

attaching Head Assembly to the Upper Post.

 

 

Route Gas Hose (E) down into Upper/Lower post assembly and

 

 

align 4 small holes on Head Assembly with 4 Small holes in Upper

 

 

Post(F).

 

 

[HINT: Control knob should be above decal on post.]

 

 

Insert 4 M6x10 (FF) bolts through 4 M6 lock washers into holes and

 

 

tighten.

 

 

Hardware Used: 4 x FF, Bolt M6x10 and Lock Washer M6

 

 

 

 

 

-

7 -

Page 7
Image 7
Well Traveled Living LIP-10A-TGG-LPG-SP manual Hint Control knob should be above decal on post