WARRANTY STATEMENT

All electrical equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

WELLS BLOOMFIELD, LLC SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transporta- tion charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Wells Bloomfield, LLC

P.O. Box 280

 

Verdi, NV 89439

 

Phone: (775) 689-5707

Fax: (775) 689-5976

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

712 76580 Owners Manual

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Hot Water Dispenser

xi

Page 2
Image 2
Wells 1222 1222CA owner manual Warranty Statement

1222 1222CA specifications

Wells 1222 1222CA represents a significant advancement in the realm of wastewater management and treatment solutions. Designed for both commercial and residential applications, this model epitomizes efficiency and reliability. It is engineered to meet the growing demand for sustainable practices in water management, addressing the complexities of wastewater through innovative technologies.

One of the hallmark features of the Wells 1222 1222CA is its advanced filtration system. The model employs a multi-stage filtration process, incorporating both mechanical and biological filtration to ensure that wastewater is treated thoroughly. The mechanical aspect utilizes fine mesh screens to capture larger particles and debris while the biological component promotes the growth of beneficial bacteria that help break down organic matter. This two-tier approach enables superior effluent quality, significantly reducing the potential for pollutants entering local water bodies.

In addition to its filtration capabilities, the Wells 1222 1222CA model includes state-of-the-art sensor technology. These sensors monitor parameters such as water levels, flow rates, and overall system performance. This real-time data collection allows for proactive maintenance and ensures that the system operates within optimal parameters. The integration of smart technology also facilitates remote monitoring and control, providing users with the ability to manage the system via a mobile application, adding convenience and enhancing operational efficiency.

The construction of the Wells 1222 1222CA is robust, utilizing high-quality, corrosion-resistant materials that ensure durability and longevity. This model is designed to withstand varying environmental conditions, making it suitable for diverse geographic locations. Furthermore, its compact size allows for easy installation in limited spaces, accommodating the needs of urban environments.

Another notable characteristic of the Wells 1222 1222CA is its energy-efficient design. By employing energy-saving technologies, the system minimizes its carbon footprint while still delivering optimal performance. This focus on sustainability is complemented by a user-friendly interface that simplifies operation for all users, ensuring that both novice and experienced operators can manage the system effectively.

Overall, the Wells 1222 1222CA offers an innovative solution for wastewater treatment, combining advanced filtration, smart technology, durable construction, and energy efficiency into one cohesive unit. This model not only meets regulatory standards but also promotes environmental stewardship, making it an invaluable asset for those dedicated to responsible water management practices.