Wells-Gardner specifications D9400/D9410, Power Input, Resolution, Miscellaneous

D9400/D9410

Series Monitor Specifications

D9400

D i g i t a l M o n i t o r

P u s h B u t t o n

C o n t r o l B o a r d

O n - S c r e e n D i s p l a y

D9410

Power Input

•Input voltage: 90-265 VAC, 47-63 Hz.

•Maximum power: 80 watts type; 95 watts Max.

Resolution

Graphics mode: CGA: 640 X 240 EGA: 773 X 384 VGA: 640 X 200, 640 X 350, 640 X 480

SVGA: 800 X 600

• Video bandwidth: 70 MHz typical.

Miscellaneous

•105 Degree Capacitors for long life and reliability.

•Operating temperature: 0 to 55 degree C.

•Agency compliance: UL, CUL, DHHS.

Specification

•CRT size (diagonal measure): 27", 33" (OPTIONAL)

•Phosphor type: P22

•Color Temperature: 9300ºK /8500K ± 300ºK/User Adjustable

•Dot trio spacing: 0.83 mm (27"), 0.92mm (33")

Input Signals

•Video Input connector 1:15 pin D-sub high density male; VGA compatible Analog .7 to 1volt level with 75 Ohm input.

•Video Input connector 2: 10 pin connector Analog 2.2 to 4 volt level at 250/350 Ohm; CGA/EGA 0.156 center header.

•Sync type: TTL & Standard CGA / EGA / VGA/ sync (positive or negative).

•Sync input: Separate or composite sync from 1 volt to 5 volt input.

•Sync Input Impedance: 2.2K Ohm (H sync and V sync)

•Horiz. / Vert. sync frequency: 15.75 to 40 KHz / 40 to 100 Hz.

Light Output

• 70 Ft-L min. (center block)

Geometry

• Horizontal linearity: Less than 7% Vertical linearity: Less than 5%

•Picture size regulation: 2%

•Geometric distortion: ±2% max.

User Controls Digitally Controlled

•Brightness, contrast, horizontal position, vertical position, horizontal size, vertical size, pin cushion, trapezoid, bow, parallel, OSD H position,OSD V position, OSD timer, degauss, color , language, Recall (factory reset), exit.

•Tilt, OSD menu

•Automatic Degauss: Manual Degauss, OSD menu.

Specification subject to change without notice.

9500 W. 55th Street, Suite A McCook, IL 60525

Tel: 708-290-2100 • 800-336-6630

Fax: 708-290-2200 www.wellsgardner.com