Wells WV-2HG, WV-2SHG Hotplate Section, CLEANING INSTRUCTIONS continued, Preparation, Cleaning

HOTPLATE SECTION

PREPARATION

Disconnect appliance from electric power Allow to cool before cleaning

FREQUENCY Daily

TOOLS

Warm water and a mild detergent Soft clean cloth or sponge Plastic scouring pad, plastic scraper

CLEANING

Disconnect appliance from electric power Allow to cool before cleaning

CLEANING INSTRUCTIONS (continued)

CAUTION:

Electric Shock

Hazard

Disconnect appliance from electric power before cleaning.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch

and may cause burns. Allow appliance to cool before

Spiral Hotplate Elements:

Raise elements. Remove and empty drip pans.

Drip pans and element supports may be washed in a sink or dishwasher. Allow to air dry and reinstall.

Scrape burned-on food debris from element using a plastic scraper or plastic scouring pad. DO NOT use steel wool or metal implements to clean elements.

Solid Plate Hotplate Elements:

Scrape burned-on food debris from element using a plastic scraper or plastic scouring pad. DO NOT use steel wool or metal implements to clean elements.

Wipe elements and counter top with a clean cloth or sponge dampened with warm water and a mild detergent. Rinse by wiping with a clean cloth or sponge dampened with warm water. Allow to air dry.

cleaning.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

DO NOT use steel wool or metal implements to clean hotplate elements.

Procedure is complete.

19