OPERATION

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 9 Ventilator Indicator and Warning Lights

VENTILATOR OPERATION

1.Press the VENTILATOR POWER switch to ON. The green VENTILATOR POWER light will glow and the blower fan will start. After a short time, if all filters are sensed as being in position and not clogged, the cooking appliance will be energized.

During normal operation, the VENTILATOR POWER light will be the only light glowing on the upper control panel.

2.If the amber CHECK FILTER light glows, one or more filter elements is out of position. Check the GREASE BAFFLE, PRE-FILTER and FILTER PACK for proper installation in their respective positions. Grease baffle and filter pack position are sensed by mechanical switches. Pre-filter position is sensed by a vacuum switch.

3.When the amber REPLACE PRE-FILTERlight glows, the pre-filter is nearing the end of its service life. Replace the disposable

PRE-FILTER ELEMENT.

4.When the amber REPLACE FILTER PACK light illuminates, the HEPA / Charcoal filter pack is nearing the end of its service life. Replace the FILTER PACK.

Note: The REPLACE PRE-FILTER and REPLACE FILTER PACK lights are a warning that the indicated filter is near the end of its service life. The appliance will continue to operate for a period of time after the light glows to allow continued operation through a peak period. However, the indicated filters must be replaced within a reasonably short time period or they will clog and shut down electrical power to the cooking appliance . The ventilator blower will continue to run.

5.When the red SERVICE REQUIRED light glows, either the pre-filter or filter pack (or both) is clogged and can no longer pass sufficient air to allow further operation. The ventilator fan continues to run, but the cooking appliance is shut down until the underlying clogged filter situation has been corrected. This can occur when neither CHANGE...FILTER indicator light is lit, if both pre-filter and filter pack are marginal. Replacing both the pre-filter and the filter pack will remedy the situation.

Note: Replacing the pre-filter, even though not very dirty, will often extend the service life of the more expensive filter pack.

Reset the unit by turning the VENTILATOR POWER switch to OFF, then back ON.

6.A failure of incoming electrical power will cause a shut down of the unit. After power is restored, reset the unit by turning the VENTILATOR POWER switch to OFF, then back ON.

NOTE: Griddle and fryer will not operate unless the fire suppression system is charged, and the ventilator section is operating .

14

Page 15 Page 17
Page 16
Image 16
Wells WV-2HGRW, WV-2SHGRW operation manual Ventilator Operation, PRE-FILTER Element
Page 15 Page 17

WV-2SHGRW, WV-2HGRW, WV-2HG, WV-2SHG specifications

Wells is a renowned name in the world of water heaters, known for its innovative technology and high-quality products. Among its impressive lineup, the WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW models stand out, each offering unique features and benefits designed to meet diverse consumer needs.

The Wells WV-2SHG is a high-efficiency water heating solution tailored for modern households. Its design emphasizes energy conservation without sacrificing performance. Equipped with dual heating elements, it ensures faster heating times and consistent water temperature, making it suitable for homes with high demand for hot water. The model also incorporates advanced insulation, reducing heat loss and improving energy efficiency.

Similar to the WV-2SHG, the WV-2HG focuses on efficiency and reliability, but with a more streamlined design. This model simplifies installation and maintenance, making it a popular choice for both homeowners and professionals. It features a state-of-the-art electronic control system, allowing for precise temperature management and user-friendly operations. The WV-2HG's compact size also makes it an ideal choice for smaller spaces without compromising on performance.

The WV-2HGRW enhances functionality with its built-in recirculation system. This unique feature allows for instant access to hot water, drastically reducing wait times for users. The recirculation system is particularly beneficial for larger households, ensuring that multiple faucets can draw hot water simultaneously without significant drops in temperature or pressure. Additionally, this model’s energy-efficient technology helps to lower utility bills while providing consistent hot water.

Lastly, the WV-2SHGRW combines the best features from its predecessors while introducing advanced smart technology. With Wi-Fi connectivity, users can control and monitor their water heater remotely via a smartphone app. This model also boasts enhanced safety features, including leak detection and automatic shut-off, providing peace of mind for homeowners. Its design focuses on sustainability, using eco-friendly materials and processes to minimize environmental impact.

In summary, the Wells WV-2SHG, WV-2HG, WV-2HGRW, and WV-2SHGRW are exemplary models that demonstrate Wells' commitment to innovation, efficiency, and user satisfaction. These water heaters showcase advanced technologies while catering to the evolving needs of modern households.
Top Page Image Contents