![](/images/new-backgrounds/1333082/333082265x1.webp)
Table 12-5 Service Menu (continued)
Menu item | Description |
|
|
USB speed |
|
|
|
Less paper curl | When printed pages are consistently curled, this option sets |
| the printer to a mode that reduces curl. |
| The default setting is Off. |
|
|
Archive print | When printing pages that will be stored for a long time, this |
| option sets the printer to a mode that reduces toner smearing |
| and dusting. |
| The default setting is Off. |
|
|
Table
Menu item | Description | |
|
|
|
TCP/IP configuration | Automatic | Select Automatic to automatically |
| Manual | configure all the TCP/IP settings. |
| Select Manual to manually configure the | |
|
| |
|
| IP address, subnet mask, and default |
|
| gateway. |
|
| The control panel prompts you to specify |
|
| values for each address section. Press |
|
| Right arrow to increase the value. |
|
| Press Left arrow to decrease the value. |
|
| Press OK to accept the value and move |
|
| the cursor to the next field. |
|
| As each address is completed, the |
|
| printer prompts for address confirmation |
|
| before moving to the next one. After all |
|
| three addresses are set, the printer |
|
| automatically restarts. |
|
| Select Reset TCP/IP to restore all the |
|
| TCP/IP settings to the default values. |
|
|
|
Link speed | Automatic | The printer automatically detects the |
| 10T Full | correct link speed for the network. Use |
| this menu to set the link speed manually | |
| 10T Half | if needed. |
|
| |
| 100TX Full | After setting the link speed, the printer |
| automatically restarts. | |
| 100TX Half |
|
|
|
|
Memory card |
| Sets memory card slots. |
|
|
|
Restore defaults |
| Resets all network configurations to their |
|
| factory defaults. |
|
|
|
ENWW |