HP CM1015 USB speed Less paper curl, Archive print, TCP/IP configuration, Link speed, Memory card

Table 3-5Service Menu (continued)

Menu item	Description
USB speed
Less paper curl	When printed pages are consistently curled, this option sets
	the printer to a mode that reduces curl.
	The default setting is Off.
Archive print	When printing pages that will be stored for a long time, this
	option sets the printer to a mode that reduces toner smearing
	and dusting.
	The default setting is Off.

Table 3-6Network Configuration Menu (Available only on HP Color LaserJet CM1017 MFP Series)

Menu item	Sub-menu item	Description
TCP/IP configuration	Automatic	Select Automatic to automatically
	Manual	configure all the TCP/IP settings.
		Select Manual to manually configure the
		IP address, subnet mask, and default
		gateway.
		The control panel prompts you to specify
		values for each address section. Press
		Right arrow to increase the value.
		Press Left arrow to decrease the value.
		Press OK to accept the value and move
		the cursor to the next field.
		As each address is completed, the
		printer prompts for address confirmation
		before moving to the next one. After all
		three addresses are set, the printer
		automatically restarts.
		Select Reset TCP/IP to restore all the
		TCP/IP settings to the default values.
Link speed	Automatic	The printer automatically detects the
	10T Full	correct link speed for the network. Use
		this menu to set the link speed manually
	10T Half	if needed.
	100TX Full	After setting the link speed, the printer
		automatically restarts.
	100TX Half
Memory card		Sets memory card slots.
Restore defaults		Resets all network configurations to their
		factory defaults.

28 Chapter 3 Control panel ENWW