Print on both sides of the paper | HP CM1015 guide

Print on both sides of the paper

NOTE For 2-sided printing, load a pre-printed form and letterhead into tray 1 face-up with the top edge of the page loaded into the MFP. Load preprinted forms and letterhead into tray 2 and tray 3 face-down with the top edge at the front of the tray.

NOTE Feeding pre-printed forms and letterhead is different than loading for 1-sided printing.

CAUTION Do not print on both sides of labels or transparencies. This can damage the MFP and result in jams.

To print on both sides (manually)

1.Insert enough paper into tray 2 or optional tray 3 to accommodate the print job.

2.In Windows, Print on both sides (manually) must be enabled to complete these instructions.

●In the printer driver, select the Finishing tab, select the Print on both sides (manually) option, then send the job to print.

60 Chapter 6 Print

ENWW

Image 74

HP CM1015 Print on both sides of the paper, To print on both sides manually

Contents

HP Color LaserJet CM1015/CM1017 MFP Page HP Color LaserJet CM1015/CM1017 MFP Copyright and License Trademark Credits Table of contents Color Software for MacintoshPrint Copy Scan Photo How do I? 114 Managing and maintaining the multifunction peripheral MFP Problem solving Appendix C Specifications Appendix a Accessories and supplies informationAppendix B Service and support Work with memory 241 Xii Multifunction peripheral MFP basics HP Color LaserJet CM1015/CM1017 MFP Series configurations HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP HP Color LaserJet CM1015/CM1017 MFP Series features HP Color LaserJet CM1015/CM1017 MFP Series Expandability AccessibilitySupplies Copy Walkaround 1Front view HP Color LaserJet CM1017 MFP shown 2Back and side view Enww Software Software and supported operating systems Install software Software Installation option Description What other software is available? Software tipsDownload the latest printing software Download drivers Print media Media supported on this MFP 1Tray specifications Media Type Dimensions1 Weight Capacity2 Media to avoid Select print mediaMedia that can damage the printer Labels Special media for printingEnvelopes Letterhead or preprinted forms TransparenciesGlossy paper and photo paper Heavy paper Control panel HP Color LaserJet CM1015 MFP control panel features HP Color LaserJet CM1015 MFP control panel features Use the two-line display HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP control panel features Enww Use the graphical display HP Color LaserJet CM1017 MFP Control-panel menu map Control-panel menusUse the control-panel menus Menu item Sub-menu item Description Menu Item Description Default paper type ServicePaper setup Default paper size Cancel job Cleaning mode Select Cancel job toCancel job is chosen Cartridge low Archive print TCP/IP configurationUSB speed Less paper curl Link speed Software for Windows Printer driver recommendations User assistance Install the PostScript driver using Add Printer This MFP supports these software components Software Description Other software Enww Uninstall Windows software using Add or Remove Programs Uninstall the printing softwareUninstall Windows software via the Program group Windows 2000 or Windows XP Uninstall a Recommended or Custom installationDelete printer drivers from the printers folder Software for Macintosh Macintosh utility and application support Install Macintosh printing system software for networksInstall printer drivers for Mac OS X V10.3 and later To install the printing system software Supported printer drivers Click the Installable Options menuMacintosh printer drivers Open the printer drivers Print a cover Use features in the Macintosh printer driverCreate and use presets in Mac OS Print multiple pages on one sheet of paper To print multiple pages on one sheet of paper Print on both sides of the paperSet the color options To print on both sides manually Enable memory To set the color options Advanced color options for text, graphics, and photographs Manage MFP color options on Macintosh computersPrint Color as Gray HP Device Configuration Mac OS X V10.3 and Mac OS X Solve common Macintosh problems Solve Problems with Mac OS Resolve software problems Print job was not sent to the correct MFP Cause SolutionUnable to print from a third-party USB card Cause Solution Resolve hardware problem Ensure there are not too many USB devices drawing power from Print Load trays Load tray 1 single-sheet feed tray Load tray Enww Enww Enww Enww Print on special media 1Special media printing guidelines Control print jobs Selecting print media settingsSetting Description Task Driver Tab Option Printer-driver featuresRestore the default printer-driver settings Such as Allow manual duplexing Printer-driver settingsPrint from Windows Print on both sides of the paper Print on both sides of the paper Cancel a print job Considerations when canceling printing Color Color options OverviewHP ImageREt Media selection Print in Grayscale Automatic versus Manual color adjustmentManage color options Change color options RGB Color Edge ControlStandard red-green-blue sRGB Neutral Grays Match colors Copy Start a copy job Cancel a copy jobBasic copy functions Change the number of copies for the current job Set the MFP to make only black and white copies Adjust copy qualityCopy paper Paper type Supported paper type Adjust the default copy quality Adjust the color balance in copiesAdjust the copy quality for the current job To adjust color balance settings Color balance option Description Adjust the lighter/darker contrast settingSet color balance on a per-job basis Change copy size for the current job To change the default copy sizeReduce or enlarge copies Copy edge-to-edge originals Copy Scan Scan methods Supported file types Program the device Scan To button from the control panel Set up pre-configured destinations on the MFPScan from the device control panel Add folder destinations Delete destinations Scan by using HP Solution Center Windows To view HP Solution Center Use page-by-page scanning Scan from the device and HP Director MacintoshScanning tasks Scan to file Use TWAIN-compliant and WIA-compliant software Scan using TWAIN-compliant and WIA-compliant softwareScan from a TWAIN-enabled program Scan a photo Cancel a scan jobScanner resolution and color Scan edge-to-edge originals Resolution and color guidelines Setting Recommended use Photo Insert a memory card Now print photos using the HP Color LaserJet CM1017 MFP View or rotate photos from the memory card To view or rotate photos from the memory card Create a photo slideshow on the graphical display screen To create a slideshow Enable or disable a memory card Print photos directly from the memory card Print and scan photos from a proof sheet Press Proofsheet Save photos to the workstation from a memory card Print photos using the Photo Features button Print a memory card index Index print Best Photo Fast Photo Set up the MFP and use it on the network Set up the MFP and use it on the network Change network settings View network settingsRestore the network defaults Manage the network IP configuration Network configurationConfiguration Manually configure a static IP address Link speed settings Automatic configuration Service name Description Supported network protocols User Datagram Protocol UDP Internet Protocol IPTransmission Control Protocol TCP IP address Subnets Configure IP parametersDynamic Host Configuration Protocol Dhcp Subnet mask Gateways Problem SolvingDefault gateway Verify that the MFP is on and online Resolve communication problems with the network Autoip Enww Enww How do I? Control panel and other settings How do I? HP Color LaserJet CM1017 MFP control panel features Use the graphical display HP Color LaserJet CM1017 MFP Enww Control-panel menus 2Reports Menu 4System Setup Menu 5Service Menu 5Service Menu Device information System SettingsPrint How do I? Print quality Print density settings DescriptionPaper handling Print density To reset all MFP settings to factory defaults Set the system passwordTo remove the system password Print Settings PostScript Control print jobsPCL5c Memory card HP Color LaserJet CM1017 MFP only Selecting print media settings Printer-driver features Printer-driver settings Print from Windows Special media for printing Envelopes Glossy paper and photo paper LabelsTransparencies Letterhead or preprinted forms Heavy paper Program the device Scan To button from the control panel Copy and Scan How do I?Scan from the device control panel Copy and Scan How do I? Print photos directly from the memory card Enable or disable a memory cardPhoto How do I? HP Color LaserJet CM1017 MFP only Print and scan photos from a proof sheet Save photos to the workstation from a memory card Find the network IP address Restore the network defaultsNetwork How do I? HP Color LaserJet CM1017 MFP only Maintenance How do I? Set the system password Calibrate the MFP Clean the scanner glassChange MFP toner warnings Calibrate the MFP from the HP ToolboxFX Clean the MFPCalibrate the MFP from the front control panel Clean the paper path using HP ToolboxFX Managing and maintaining the multifunction peripheral MFP Information pages ConfigurationTo print the Configuration page from the control panel Demo Information pages Supplies Status To print the Supplies Status page from the control panel Networking page HP Color LaserJet CM1017 MFP only To print a fonts page from the control panel Fonts pagesUsage Enww Menu map To print a menu map HP ToolboxFX View HP ToolboxFX Status Event log Alerts Set up status alertsSet up e-mail alerts Help System Settings Paper handling Set the system password Print Settings Network settings Windows Macintosh Access the embedded Web server using a network connectionUse the embedded Web server Settings tab Information tab Networking tab Other links found in HP ToolboxFX Manage supplies Check supply status and order using the control panelCheck and order supplies using HP ToolboxFX Supplies life Supplies Storage Guidelines Check and order supplies using HP Solution CenterReset the MFP for non-HP supplies Replace and recycle supplies HP anti-counterfeit supplies Web site Clean the scanner glass Clean the MFP Clean the paper path using HP ToolboxFX Cartridge-out override On-going operation Change print cartridges Change the print cartridge Change print cartridges Enww Enww Calibrate the MFP from the HP ToolboxFX Calibrate the MFPCalibrate the MFP from the front control panel Problem solving Step Verification step Possible problems Solutions Number Problem solving processProblem solving checklist Computer? Card? Control-panel messages Control panel message Description Recommended action Device error Fan ErrorCleaning Turn off then turn on Install black cartridge InstalledInstall color cartridge HP supplies Memory card slots Are disabled Memory is low. Press OKMemory card is unsupported Memory low Use Non-HP color installedNon-HP supply Ready Unknown Memory Card Error Scanner ErrorScanning error Replace supply Print-quality checklist Solve print problemsPrint-quality problems General print quality issues Problem Cause Solution Problem Cause Configuration page. If so, contact Solve issues with printing color documents See Load trays AaBbCc Print-media guidelines Media-handling problemsSolve print-media problems Or from a faulty paper lot Performance problems See Media-handling problems Resolve copy problems Calibrate the MFP MFP Resolve scanning problems Use the table to solve image-scan issues Resolve scan-quality problems using the table Enww Was the device exposed to an electric or magnetic field? Where to look for jams Clear paper jams Clear jams from inside the MFP Enww Clear jams from tray output area Clear jams from the back of the MFP Clear jams from tray 2 or optional tray Slide the tray into the MFP Open and close the front door Device pages and reports Additional problem solving toolsService menu HP ToolboxFX To clean the paper path Clean the paper pathTo restore the factory-set defaults Calibrate the MFP Enww Work with memory MFP memory Install memory DIMMs Enww Enww Go to Check Dimm installation To enable memory for Windows Check Dimm installationEnable memory Enww Accessories and supplies information Product name Description Part number SuppliesMemory Cable and interface accessories Paper handling accessories Paper and other print media User-replaceable parts Supplementary Documentation Language Part number Enww Service and support Hewlett-Packard limited warranty statement Print Cartridge Limited Warranty Statement Online troubleshooting tools HP Customer Care Availability of support and service HP Care Pack Services and Service Agreements Repacking the MFP Repack the MFP Service information form WHO is Returning the EQUIPMENT? Enww Specifications Volt models Multifunction peripheral MFP specificationsPower requirements Rated current Recommended1 Operating1 Storage1 Sound Power Level Declared Per ISOCategory Specifications When heated to 210C 410F for 0.1 second Regulatory information Introduction FCC regulations Protecting the environment Power consumptionEnvironmental Product Stewardship program Ozone production Returns Material safety data sheet Extended warranty Declaration of conformity Declaration of Conformity Canadian DOC statement Country/region-specific safety statementsLaser safety statement Korean EMI statement Vcci statement Japan Japanese Power Cord Statement Finnish laser statement Laserturvallisuus Luokan 1 Laserlaite Klass 1 Laser Apparat Symbols/Numerics Index Dimm Gateways Bootp MFP FCC WIA TCP Enww Page CB394-90907* *CB394-90907