Table C-4 Power consumption (average, in watts)1
Product | Printing (Color)2 | Printing (Black and | Copying2 | Ready2 | Power Save | Off |
model |
| White)2 |
|
|
|
|
|
|
|
|
|
|
|
HP Color | 200 W | 190 W | 150 W | 18 W | 18 W | 0 W |
LaserJet |
|
|
|
|
|
|
CM1015 MFP |
|
|
|
|
|
|
|
|
|
|
|
|
|
HP Color | 200 W | 190 W | 150 W | 18 W | 18 W | 0 W |
LaserJet |
|
|
|
|
|
|
CM1017 MFP |
|
|
|
|
|
|
1Values subject to change, see http://www.hp.com/support/cljCM1015_CM1017 for current information.
2Power reported is highest values measured for color and monochrome printing/copying using all standard voltages.
3Default time from Ready Mode to Power Save = 0 minutes.
4Recovery time from Power Save to start of printing = 14 seconds
5Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour
6HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
WARNING! Power requirements are based on the country/region where the MFP is sold. Do not convert operating voltages. This can damage the MFP and void the product warranty.
Table C-5 Environmental specifications
| Recommended1 | Operating1 | Storage1 |
|
|
|
|
(MFP and print cartridge) | 20° to 27°C (68° to 81°F) | 15° to 32.5°C (59° to 90.5°F) | |
Temperature |
|
|
|
|
|
|
|
Relative humidity | 20% to 70% | 10% to 80% | 95% or less |
1Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017 for current information.
Table C-6 Acoustic emissions1
Sound Power Level | Declared Per ISO 92961 |
|
|
Printing/Copying (8 PPM)2 | LWAd = 5.8 Bels (A) [58 dB (A)] |
Ready | Inaudible |
|
|
Sound Pressure Level | Declared Per ISO 92961 |
|
|
Printing/Copying (8 PPM)2 | LpAm = 46 dB(A) |
Ready | Inaudible |
1Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017 for current information.
2Configuration tested: HP Color LaserJet CM1017 MFP, continuous monochrome printing on A4 paper at 8 PPM.
3HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
Table
Category | Specifications |
|
|
Acid content | 5.5 pH to 8.0 pH |
|
|
Caliper | 0.094 to 0.18 mm (3.0 to 7.0 mils) |
|
|
ENWW | Multifunction peripheral (MFP) specifications 229 |