HP CM1015 Basic copy functions, Start a copy job, Change the number of copies for the current job

Basic copy functions

This MFP can complete these basic copy functions.

Start a copy job

1.Load the original document onto the flatbed scanner face-down (one page at a time) with the upper- left corner of the document located in the lower-right corner of the glass.

2.Press Start Copy Black or Start Copy Color on the control panel to start copying.

3.Repeat the process for each copy.

Change the number of copies for the current job

1.Press # of Copies to select the number of copies (between 1 and 99) to make for this current job.

2.Press Start Copy Black or Start Copy Color to begin copying the job.

NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the MFP control-panel display.

Cancel a copy job

To cancel a copy job, press Cancel. If more than one process is running, pressing Cancel clears the process that currently appears on the control-panel display. When a copy job is canceled, clear the original document from the flatbed scanner.

70 Chapter 8 Copy ENWW