Filename [MV5S_08Basic TimerDub.fm]
Masterpage:Left+
34 EN TIMER RECORDING
Page 34Wednesday, 8 June 2005 11:00
Check, Cancel And Change Programmes
1When the DVD timer indicator lights on the front display
panel
Press TIMER #, then press 1.
When “ ” lights on the front display panel and the DVD
timer indicator also lights up on the front display panel.
Press 1.
When “ ” lights on the front display panel
Press SAT #, then press 1.
2Press PROG to access the Programme Check screen, then
press rtw e to select “VHS PRGM CHECK” or “DVD PRGM
CHECK”.
●To return to the previous screen after you check the programme,
press PROG again.
To cancel the programme
Press rt to select a programme to be cancelled, then press
CANCEL.
3Press rt to select the programme, then press ENTER. The
programme screen appears.
4Change the settings of the desired recording options as
required.
●Refer to steps 5–10 in “Manual Timer Programming” (墌pg.31).
5Press PROG to complete timer correction. The normal screen
resumes.
6For SHOWVIEW, Manual or On-Disc Timer Programming
(DVD deck only)
Press TIMER #.
For Automatic Satellite Programme Recording
Press SAT # for 2 seconds or more.
●The DVD timer indicator also lights up on the front display panel and
the VHS deck is automatically selected. When the VHS deck is in
timer standby mode, the unit is automatically turned off.
NOTE:
When you check, cancel and change a On-Disc Timer Programming,
be sure to insert the On-Disc Timer programmed disc.
rtwe
ENTER
VHS

PROG TIMER

SAT

DVD
CANCEL
Programme’s information on the front display panel
You can check the details of the programmes even when the
power is turned off. (it is necessary that the Power Save mode
(墌pg.79) is disengaged or the unit is not in timer standby
mode.) However, it is not possible to cancel or change the
programme’s setting.
APress PROG.
●“NEW PROG” or “P-1” (if 8 programmes have already been set)
appears.
BPress rt until the desired programme number (“P-1” to “P-
8”) appears, then press ENTER.
CPress e.
●Each time you press e, the indication changes as follows (the
settings in parentheses are examples):
Date (“DATE 08.03SU”) ] Start time (“ON 11:00”) ] Stop time
(“OFF 11:30”) ] Channel (“PR 1”) ] Weekly/Daily (“MO-FR
DAILY”) ] Programme number (“P-1”) and recording mode (“SP”)
] (Back to the beginning)
DPress PROG to complete checking.
●The normal display resumes.
MV5S_08Basic TimerDub.fm Page 34 Wednesday, June 8, 2005 11:00 AM