DVD SET UP FUNCTION SET UP INITIAL SET UP
VIDEO IN/OUT RECORDING SET DISPLAY SET OTHERS

78 EN SUBSIDIARY SETTINGS

Mode Set (DVD Deck)

* The boldface settings below indicate the settings at your purchase.

AUDIO OUTPUT

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the TV/DVD switch to DVD.

DVD

8DIGITAL AUDIO OUT — DOLBY DIGITAL / PCM / STREAM /

PCM / PCM ONLY

Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUTPUT] connector.

DOLBY DIGITAL/PCM: Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built-in Dolby Digital Decoder.

STREAM/PCM: Select this when you connect the digital input connector of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder.

PCM ONLY: Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.).

NOTE:

If you watch or play back a title which contains multiple audio languages, select “PCM ONLY” in advance and choose main or sub audio with AUDIO.

ENTER

rtwe

8ANALOG AUDIO OUT STEREO / DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.

STEREO: Select this when listening to conventional two-channel stereo audio with the unit’s [AUDIO OUTPUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND: Select this when listening to multichannel surround audio with the unit’s [AUDIO OUTPUT] connectors connected to an amplifier/receiver with a built-in surround decoder or a surround decoder.

SET UP

Various modes of this unit are categorised into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 78 through 80), then follow the procedure below.

DVD SET UP

LANGUAGE SET ( pg. 20)

 

AUDIO OUTPUT ( pg. 78)

 

UTILITY ( pg. 89, 90)

FUNCTION SET UP

VIDEO IN/OUT ( pg. 21, 44)

 

RECORDING SET ( pg. 79)

 

DISPLAY SET ( pg. 79)

 

OTHERS ( pg. 80)

 

 

INITIAL SET UP

AUTO CH SET ( pg. 84)

 

MANUAL CH SET ( pg. 85)

 

GUIDE PR ( pg. 83)

 

CLOCK SET ( pg. 88)

 

 

The procedure below shows how to set the desired option of the “AUDIO REC” mode as an example.

1 Press DVD so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen.

3Press w e to select “FUNCTION SET UP”, then press t.

4 Press w e to select “RECORDING SET”, then press t.

5 Press rt to select “AUDIO

 

SAVE AS LIBRARY

 

 

ON

 

 

 

 

 

 

 

 

REC”, then press ENTER.

 

XP MODE REC AUDIO

 

DOLBY DIGITAL

 

 

 

 

 

 

 

 

 

AUDIO REC

 

 

NICAM1/MAIN

 

6 Press rt to select the desired

 

 

 

 

 

NICAM1/MAIN

 

 

DIRECT REC

 

 

NICAM2/SUB

 

option, then press ENTER.

 

 

 

 

 

MONO

 

 

INPUT COLOUR SYSTEM

 

 

 

 

 

 

 

 

 

 

7 Press SET UP to complete the

SET UP

OK

SELECT WITH [CURSORS]

EXIT

SELECT

THEN PRESS [ENTER]

8D. RANGE CONTROL NORMAL / WIDE RANGE / TV

MODE

The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.

This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. NORMAL: Normally select this setting to activate this function. WIDE RANGE: Select this to deactivate this function when you

enjoy wide dynamic range programme.

TV MODE: Select this when you hear the sound through the TV’s speaker(s).

NOTES:

This function has no effect on programmes other than that recorded in Dolby Digital format.

The effect of “NORMAL” and “WIDE RANGE” may not be different depending on discs.

8OUTPUT LEVEL STANDARD / LOW

You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.

STANDARD: Normally select this setting.

LOW: The output level of analog audio is lowered.

setting.

Page 78
Image 78
JVC DR-MV5SE manual Mode Set DVD Deck, Utility  pg, Others  pg, REC, then press Enter

DR-MV5SE specifications

The JVC DR-MV5SE is a versatile and innovative combination VCR/DVD recorder that caters to users looking to bridge traditional and modern media formats. Launched during a time when digital recording was gaining momentum, the DR-MV5SE offers a range of features that make it a valuable device for preserving and enjoying audiovisual content.

One of the primary features of the JVC DR-MV5SE is its ability to record directly from VHS tapes to DVD, providing a seamless way to convert old home videos into a more durable format. This process is not only efficient but also user-friendly, making it accessible for audiences of all ages. The device supports various recording modes, allowing users to choose between standard play, long play, and extra-long play, which adjusts the recording time according to their needs.

Equipped with a built-in digital tuner, the DR-MV5SE facilitates easy access to digital terrestrial TV broadcasts. This feature enables users to directly record their favorite shows and programs from the television, ensuring they never miss a moment. The device also includes a variety of connectivity options, such as HDMI output, composite video output, and S-Video output, which contribute to enhancing the overall playback quality. The availability of DVD-R, DVD-RW, and DVD+RW formats broadens the scope for recording and playback, as users can choose from rewritable options or more permanent solutions.

Technologically, JVC has integrated several enhancements into the DR-MV5SE, including the ability to edit recorded content. Users can easily trim unwanted segments, providing a polished final product. Additionally, the device features VCR Plus+ programming, simplifying the scheduling of recordings by allowing users to input a code associated with the desired program.

In terms of design, the JVC DR-MV5SE is compact and user-friendly, featuring an intuitive interface that makes navigation straightforward. This combination of functionality and simplicity ensures that both novice and experienced users can easily operate the device.

Overall, the JVC DR-MV5SE stands out as a practical solution for those wishing to preserve their cherished VHS memories and enjoy modern DVD playback. With an array of recording options, digital tuning capabilities, and editing features, it is an essential tool for multimedia enthusiasts looking to transition from analog to digital with ease. Whether for personal archives or simply enjoying favorite movies, the DR-MV5SE represents a reliable and effective choice in the realm of recording technology.