Masterpage:Right+
EN 49
Filename [MV5S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 49Wednesday, 8 June 2005 11:32
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want to
play back once again later, and start playback from a marked
position. Marking onto DVD-RAM/RW (VR mode only) discs when
recording is helpful to locate a start point when you play back the
discs later.
To mark positions:
During playback, press MARK at
positions you want to mark.
●“MARK” appears on the TV screen.
You can easily locate the marked
positions using 2 or 6 when you
play back the disc.
To delete the marked positions:
While paused, press 2 or 6 to
locate a marked position you want to
delete, then press MARK.
●Crossed “MARK” appears on the TV
screen, and the marked position is
deleted.
NOTES:
●When a monaural or bilingual programme changes to a stereo
programme while recording, a mark signal is automatically recorded.
●Titles will be divided into “chapters” at the marked points according to
the disc types as follows:
DVD-R/RW (Video mode): After finalising, titles are divided into
“chapters” at the marked points that are marked automatically
approximately every 5 minutes during recording before finalising.
(墌pg.90)
DVD-RW (VR mode): After finalising, titles are divided into “chapters”
at the marked points that are marked at the desired locations during
playback before finalising. (墌pg.90)
DVD-RAM: Titles are divided into “chapters” at the marked points that
are marked at the desired locations during playback.
DVD VIDEO and finalised disc: Creating of marked points are not
permitted.
Checking The Time Information
You can check time information of a disc on the front display panel
and the TV screen.
Each press of DISPLAY changes the display as follows:
8DVD-RAM/DVD-R/DVD-RW
During recording
Clock time (front display panel only) ] Current title elapsed time
] Disc remaining time* ] (back to the beginning)
* only discs before finalising
●Clock time is displayed only when a recordable disc is recorded.
During playback
Each title elapsed time ] Current title elapsed time ]
Disc remaining time* ] (back to the beginning)
* only discs before finalising
In stop mode or during playback
●It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
●In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press rt to select “FR”, then press we to
select the desired recording time. (墌pg.62)
●It is not possible to switch the recording mode during playback or
while recording.
8Video CD/Audio CD
During playback
Current track elapsed time ] Current track remaining time ] Tota l
elapsed time ] Total remaining time ] (back to the beginning)
In stop mode
0:00 ] Playback time of track 1 ] 0:00 ] Total length of a disc ]
(back to the beginning)
NOTE:
When a PBC-compatible Video CD disc is loaded, deactivate the PBC
function. (墌pg.50)
Angle Selection
You can enjoy a variety of scene angles if a DVDVIDEO disc
contains “multi-angle” parts, where the same scene was shot from
different angles.
If the disc contains “multi-angle” parts, “ ” appears on the TV
screen at the beginning of the “multi-angle” part.
1Press ANGLE during playback.
The angle selection display
appears on the TV screen.
2Press ANGLE or we to select
your desired angle.
●Each time you press ANGLE or
we, the angle changes.
●When “X” appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit angle
selection.
●To clear the angle selection display, press ENTER. In addition, the
angle selection display disappears automatically if no operation is
done for 10 seconds.
Subtitle Selection
Some DVDVIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
“ ” appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
1Press SUBTITLE during
playback. The subtitle selection
display appears on the TV screen.
●Each time you press SUBTITLE,
the subtitle display is switched on
and off.
2Press we to select your desired language.
●To clear the subtitle selection display, press ENTER.
NOTES:
●When “X” appears on the TV screen, no subtitle language is
recorded.
●When the subtitle language won’t be changed with the procedure
above, change the subtit le on a disc menu displayed by pressing
MENU.
When 3 scene angles are
contained.
When 3 subtitle languages are
contained.
ENGLISH
MV5S_09Advanced Operation.fm Page 49 Wednesday, June 8, 2005 11:33 AM