Masterpage:Right+
EN 87
Filename [MV5S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 87Wednesday, 8 June 2005 11:05
When Receiving A Scrambled Broadcast (DVD Deck Only)
1Set “L-2 SELECT” to “DECODER”. (墌pg.45)
2Perform steps 1–3 of “Manual Channel Set” (墌pg.85).
3Press rtw e to select the channel position broadcasting
scrambled programmes, then press ENTER twice.
4Press rt to select “DECODER”, then press ENTER.
5Press rt to set “DECODER” to “ON”, then press ENTER.
6Press RETURN to return to the Confirmation screen.
●Repeat steps 3–6 as necessary.
7Press SET UP twice to close the Confirmation screen.
Set Stations (A)
Set station names that are registered in your unit.
1Perform steps 1–3 of “Manual Channel Set” (墌pg.85) to
access the Confirmation screen before continuing.
2Press rtw e to select the item you want.
3Press ENTER twice to access the Manual Channel Set screen.
4Press rt to select “ID”, then press ENTER.
5Press rt until the new station’s name (ID) you want to store
appears, then press ENTER. Registered station names (墌pg.97)
appear as you press rt.
6Press we to select “OK”, then press ENTER.
●Repeat steps 2–6 as necessary.
7Press SET UP twice to close the Confirmation screen.
Set Stations (B)
Set station names other than the ones registered in your unit.
1Perform steps 1–3 of “Manual Channel Set” (墌pg.85) to
access the Confirmation screen and then perform steps 2 and 3 of
“Set Stations (A)” above before continuing.
2Press rt to select “ID”, then press ENTER.
3Press ENTER twice.
4Press we to locate the character insertion point.
5Press rt to cycle through the characters (A–Z, 0–9, –, f, +, I
(space)) and stop when the desired character is indicated, then
press e to enter.
●Enter the remaining characters the same way (maximum of 4).
6After entering all characters, press we to select “OK”, then
press ENTER.
7Press SET UP twice to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
f, +, I (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1Perform steps 1–3 of “Manual Channel Set” (墌pg.85) to
access the Confirmation screen before continuing.
2Press rtw e to select the channel you want to fine-tune, then
press ENTER.
3Press ENTER twice.
4Press ENTER to access the Manual Channel Set screen. The
Manual Channel Set screen appears.
5Press rt to select “FINE”.
6Press we until the picture appears in its best quality.
●Repeat steps 2–6 as necessary.
7Press SET UP three times to close the Confirmation screen.
INFORMATION
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcast as follows.
For Eastern Europe: D/K
For Western Europe: B/G
ASelect a country in Eastern Europe in step 4 of “Auto
Channel Set” (墌pg.84).
BPress rt to select “TV SYSTEM” in step5 of “Manual
Channel Set” (墌pg.85).
CPress rt to select appropriate TV System (D/K or B/G).
MV5S_13Subsidiary.fm Page 87 Wednesday, June 8, 2005 11:05 AM