Filename [MV5S_13Subsidiary.fm]
Masterpage:Left+
84 EN SUBSIDIARY SETTINGS
Page 84Wednesday, 8 June 2005 11:05
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR+/– buttons without going through any
vacant channels.
Auto Channel Set
1Press SET UP to access the Main Menu screen.
2Press we to select “INITIAL SET UP”, then press t.
3Press we to select “AUTO CH
SET”, then press t.
4Press rtw e to select your
country’s name, then press
ENTER.
5Press rtw e to select the
language of your choice.
6Press ENTER twice.
●When you have connected the
unit to a TV offering T-V Link via a
fully-wired 21-pin SCART cable
(墌pg.15), the unit automat ically
performs the Preset Download
and the T-V LINK screen will
appear. (墌pg.18)
●The Auto Set screen appears, and
remains on screen while the unit
searches for receivable stations.
Wait until the TV screen as shown in step7 appears.
7View the Confirmation screen.
“SCAN COMPLETED” is displayed on the TV screen. Press “OK”.
8Press SET UP to complete the setting.
●When Auto Channel Set is completed, “PLEASE WAIT” will be
displayed for about 90 seconds, since channel data is exchanged
between the DVD deck and the VHS deck. No operations will be done
during this time.
●Using the Confirmation screen, you can skip or add channel
positions, enter station names and perform other operations. Refer to
pages 85– 87 for the procedures.
●Depending on reception conditions, the stations may not be stored in
order, and the station names may not be stored correctly.
●For information on scrambled broadcasts, refer to “When Receiving A
Scrambled Broadcast (DVD Deck Only)” (墌pg.87).
NOTES:
●Fine tuning is performed automatically during Auto Channel Set. If
you want to perform tuning manually, refer to “Fine-Tuning Channels
Already Stored” (墌pg. 87).
●If you perform Auto Channel Set when the aerial cable is not
connected properly, “SCAN COMPLETED –NO SIGNAL–” appears
on the TV screen in step 7. In such a case, make sure of the aerial
connection and press ENTER; Auto Channel Set will start again.
●If no sound accompanies the picture or the audio sounds unnatural
on some channels that have been stored by Auto Set Up, the TV
system setting for those channels may be incorrect. Select the
appropriate TV system for those channels. (墌pg. 87,
“INFORMATION”)
Tuner Set●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
IMPORTANT:
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (墌pg.17, 18)
— you have moved to a different area or if a new station starts
broadcasting in your area.
ENTER
VHS
SET UP
IMPORTANT:
●In certain reception conditions, station names may not be stored
correctly, and Auto Guide Program Number Set may not work
properly. When the Guide Program numbers are not set properly,
the programme that you do not intended to record will be timer-
recorded by the SHOWVIEW system of the unit. When programming
the timer using the SHOWVIEW system, be sure to check the
desired channel is selected correctly. (墌pg.29)
●Your unit memorises all receivable stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture from the list. (墌pg. 86, “Delete A Channel”)
OK SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT SELECT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
AUTO CH SET
MANUAL CH SET
GUIDE PR CLOCK SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
ENGLISH DEUTSCH FRANCAIS ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA NORSK
SUOMI DANSK
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
INITIAL SET UP / AUTO CH SET
RETURN
MV5S_13Subsidiary.fm Page 84 Wednesday, June 8, 2005 11:05 AM