Masterpage:Right+
EN 59
Filename [MV5S_09Advanced Operation.fm]
ADVANCED PLAYBACK
Page 59Wednesday, 8 June 2005 11:32
Still Picture/Frame-By-Frame Playback
1Press 9 to pause during playback.
●If there is vertical jitter, press PR+/– to correct the picture.
2Press 9 repeatedly to activate frame-by-frame playback.
●To resume normal playback, press 4.
Slow Motion
1Press 9 to pause during playback.
2Press and hold 9 for 2 seconds, then release. Press 9 and
release again to return to still picture.
●The speed changes for each direction by pressing 3 and 5
repeatedly.
●To resume normal playback, press 4.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR+ or – to el iminate the noises.
High-Speed Search
During playback, press 5 for forward high-speed search, or 3
for reverse high-speed search.
●Each press of the button increases the search speed for each
direction.
When pressing 5:
(SP): +5x{+7x
(LP): +11x{+21x
When pressing 3:
Once 3 is pressed, reverse search starts in –1x normal playback
speed. After this process, each press of 3 changes the search
speed between –5x and –7x in SP mode, –11x and –21x in LP mode.
(SP): –1x]–5x{–7x
(LP): –1x]–11x{–21x
●To resume normal playback, press 4.
Quick Rewind A Little
During playback, press . The unit rewinds the picture a little
(about 7 seconds) and resumes playback.
●If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press 1 to 6 times to skip over unwanted
sections.
●Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
●To resume normal playback, press 4.
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press 2 or 6 to activate Index Search. “–1” or “+1” is displayed on
the TV screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press 2 or 6 repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press 2
twice.
To locate the beginning of D from the current position, press 6
once.
●When the specified index code is located, playback begins
automatically.
Advanced Playback (VHS)●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
●Press VHS so that the VHS lamp lights up on the unit.
Clean the video heads using a dry cleaning cassette when:
●Rough, poor picture appears while a tape is played back.
●The picture is unclear or no picture appears.
●“USE CLEANING CASSETTE” appears on the screen (only with
“SUPERIMPOSE” set to “AUTO”). (墌pg.79)
NOTE:
The heads get dirty in the following cases:
●in an environment prone to extreme temperature or humidity
●in a dusty environment
●flaw, dirt or mold on video tapes
●continuous usage for a long time
A
TTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
●the picture will be distorted.
●the noise bars will appear.
●there may be a loss of colour.
●you cannot hear the sound.
PR +/–
VHS
Index number
Current position
MV5S_09Advanced Operation.fm Page 59 Wednesday, June 8, 2005 11:33 AM