If yes, the problem is workstation-specific. Verify that both workstations are using the same network settings.

CAUTION Do not assign identical TCP/IP addresses to two network devices on the same network.

5.If network communication is not resolved by using steps 1 through 3, or if other users can not print, reset all network configuration settings to factory-defaults by selecting Restore defaults from the control panel. After the MFP automatically power cycles, wait four to six minutes and verify that the network functionality is working properly. Contact the network administrator for more information.

ENWW

Set up the MFP and use it on the network 109

Page 123
Image 123
HP CM1015 manual Enww