![](/images/new-backgrounds/1333082/333082275x1.webp)
PCL5c
Configure these PCL5c settings:
●Font number
●Font pitch
●Font point size
●Symbol set
●Append CR to LF
●Form length
PostScript
Use the PostScript option when using the PostScript print personality. When the Print PostScript error option is turned on, the PostScript error page automatically prints when PostScript errors occur.
NOTE Click Apply to make the changes take effect.
Memory card (HP Color LaserJet CM1017 MFP only)
Use the three HP ToolboxFX memory card options to configure print settings when using memory cards.
●Photo image size. Select the size photos to print from the
●Photo number of copies. Type the number of copies from 0 to 99 to print for each image.
●Photo output color. Select either Color or Monochrome from the
Click the Enable memory cards checkbox to save the settings.
Control print jobs
When changing print settings, follow the hierarchy of how changes are prioritized. (Note that the names of commands and dialog boxes might vary depending on the software program.)
●Application Settings dialog box. This dialog box opens when you click Application Settings or a similar command on the File menu in the software program. This dialog box is part of the program in which you are working. Settings that are changed here override settings that are changed anywhere else.
●Print dialog box. This dialog box opens when you click Print, Print Setup, or a similar command on the File menu in the software program. It is also part of the program, but it has a lower priority than the Application Settings dialog box. Settings that are changed in the Print dialog box do not override settings that are changed in the Application Settings dialog box. Settings that are changed here do override settings that are changed in the printer driver.
●Printer driver. The printer driver opens when you click Properties in the Print dialog box. Settings that are changed here do not override settings that are changed anywhere else.
124 Chapter 12 How do I? | ENWW |