HP CM1015 manual 5Service Menu

Table 12-4System Setup Menu (continued)

Menu Item	Sub-menu item	Sub-menu item	Description
			Press OK to select the default
			setting.
			Select Override to print
			on a different size paper
			after a specified delay.
			Select Cancel job to
			automatically cancel the
			print job after a specified
			delay.
			If either Override or
			Cancel job is chosen,
			the control panel
			prompts for the number
			of seconds to delay.
			Press the Right arrow to
			increase the time up to
			3600 seconds. Press
			Left arrow to decrease
			the time.
Print quality
	Calibrate color	Calibrate now	Calibrate now: Directs the
		Power-on calibration	printer to immediately
			calibrate. When a job is
			processing, the printer
			calibrates after the job is
			complete. When an error
			message displays, clear the
			error before continuing.
			Power-on calibration: Select
			how quickly the printer should
			calibrate after it is powered
			on. The default setting is 15
			minutes.
	Cartridge low		Signals that the cartridge is
			almost empty.
	Replace supplies		Displays message that a
			supply or supplies need to be
			replaced.
Courier font			Select courier font values.

Table 12-5Service Menu

Menu item	Description
Cleaning mode	This options cleans the printer when specks or other marks
	appear on printed output. The cleaning process removes dust
	and excess toner from the paper path.
	When selected, the printer prompts to load plain paper in tray
	1 and then press OK to begin the cleaning process. Wait until
	the process completes. Discard the page that prints.
Restore defaults	Sets all customized settings to the factory default values.

118 Chapter 12 How do I? ENWW