NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.

Change the default media size in the media input tray to match the output size, or part of the copy can be cut off.

Copy edge-to-edge originals

NOTE The printed or copied page has a border of approximately 4 mm (1/6 of an inch). The HP Color LaserJet CM1015/CM1017 MFP does not support edge-to-edge printing or copying.

Considerations for printing or scanning documents with cropped edges:

When the original is smaller than the output copy size, move the original 4 mm (1/6 inch) away from the bottom and right edges of the scanner glass. Recopy or scan in this position.

When the original is the size of the desired output, make a copy with smaller edges by:

Select Reduce/Enlarge, and press the navigation arrows to select Full Page=91%, then press Start Copy Black or Start Copy Color.

The edges and the copy are reduced in size by up to 2 mm.

ENWW

Copy paper 75

Page 89
Image 89
HP CM1015 manual Copy edge-to-edge originals