Wells WV-2SHG Ventilator Section Cleaning Instructions, Electric Shock Hazard, Hot Surface

CLEANING INSTRUCTIONS

CAUTION:

ELECTRIC SHOCK

HAZARD

Disconnect appliance from electric power before cleaning.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch

and may cause burns. Allow appliance to cool before cleaning.

IMPORTANT:

Never allow PRE-FILTER or FILTER PACK to get wet. DO NOT wash either of these two filters. Washing these filters will ruin them and cause the appliance to shut-down.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring.

Do not splash or pour water on, in or over any controls, control panel or wiring.

IMPORTANT:

DO NOT use steel wool or metal implements to clean drawers or cabinet surfaces.

VENTILATOR SECTION CLEANING INSTRUCTIONS

PREPARATION

Disconnect appliance from electric power

Allow to cool before cleaning

FREQUENCY Weekly

TOOLS

Warm water and a mild detergent

Soft clean cloth or sponge

Bristle brush

Container for disposal of grease

CLEANING

Disconnect appliance from electric power Allow to cool before cleaning

Remove the grease baffle, pre-filter assembly, grease trough and grease cup. Empty the grease trough and grease cup.

Remove the pre-filter from the filter frame. Wash and rinse the filter frame ONLY.

Wash and rinse the grease baffle, grease trough and grease cup in a sink or dishwasher using mild detergent and warm water. Allow to air dry.

Reinsert the pre-filter into the filter frame. Reinstall the pre-filter, grease baffle, grease trough and grease cup.

Procedure is complete

18