HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the reed switch should be adjusted. In order to adjustthe reed switch,the left side shield must be removed (see
HOW TO ADJUST THE RESISTANCE STRAP on page 10).
With the left side shield removed, locate the Reed Switch (43). Turn the Crank (21) until the Magnet (38) is aligned with the Reed Switch. Loosen, but do not remove, the M4 x 16ram Screw (49). Slide the Reed Switch slightlycloser to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment.
Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and the left pedal.
11
