Weslo 831.2831 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing matedals untilassembly is completed.

Assembly requires the included tools and your own adjustable wrench _,		Phillips screw-
driver (_3_-,	and pliers _.

Use the part drawings below to identifythe small parts used in assembly.The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached,

M8 Split	M8 Nylon	M10 Nylon
Washer (42)-10	Locknut (10)-4	Locknut (33)-4

M4 x 16mm	M8 x 15mm Button	MIO x 65mm Carriage Bolt (30)-4
Screw (49)-4	Screw (34)-6

1. While another person lifts the front of the Frame (1)
slightly,attach a Stabilizer (2) with two M1O x 65mm	3O
Carriage Bolts (30) and two M10 Nylon Locknuts(33).

2

2. While another person lifts the rear of the Frame (1)

slightly,attach a Stabilizer (2) with two M10 x 65mm33

Carriage Bolts (30) and two M10 Nylon Locknuts (33).

2

33

30

4