Weslo E 20 Maintenance and Storage, Battery Replacement, Crank Adjustment, Tightening the Pedals

MAINTENANCE AND STORAGE

Inspect and tighten all parts of the exercise cycle reg- ularly. The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

BATTERY REPLACEMENT

If the console does not function properly, the batteries should be replaced. See assembly step 4 on page 6.

CRANK ADJUSTMENT

If the arms of the
Crank (8)
become loose,
they should be	Slotted
tightened in order
	Crank Nut
to prevent exces-
sive wear.	14
Loosen the Hex
Crank Nuts (14)	8
on the left arm of
the Crank. Place

the tip of a standard screwdriver in one of the slots in the slotted crank nut. Tap the screwdriver with a ham- mer to turn the slotted crank nut counterclockwise until the arms are no longer loose. Do not overtight- en the slotted crank nut. When the slotted crank nut is properly tightened, tighten the Hex Crank Nuts.

HOW TO REMOVE THE LEFT SIDE SHIELD

To remove
the Left Side	13
Shield (20),
first turn the		8
Left Pedal
	20	13
(39) clock-
wise using an
adjustable
wrench, and		39
remove it.	5	18
Next, remove
		13
the indicated
M4 x 12mm
Screw (5), the

M4 x 38mm Self-tapping Screws (13), and the M4 x 10mm Screw (18). Grip both Side Shields and gently pull them apart. Turn the left arm of the Crank (8) to the position shown, and carefully slide the Left Side Shield forward and remove it.

TIGHTENING THE PEDALS

After using the exercise cycle for one week, retighten the pedals. For best performance, the pedals must be kept properly tightened. Check pedal tightness on a weekly basis.

11