13
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective.
When you select the manual mode of the console, you
can change the speed of the treadmill with the touch of
a button. As you exercise, the displays will provide
continuous exercise feedback. You can even measure
yourheart rate using the built-in pulse sensor.
The consolealso offers four speed programs. Each
program automatically controls the speed of the tread-
mill as it guides you through an effective workout.
IMPORTANT: If there is a sheet of clear plastic on
the face of theconsole, remove the plastic.To pre-
vent damage to the walking platform, wear clean
athletic shoes while using the treadmill. Thefirst
timethe treadmill is used, observe the alignmentof
thewalking belt, and center the walking belt if nec-
essary (seepage 20).
HOW TOTURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
Plug inthe power cord (see
page12). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
“reset” position.
Next,stand on the foot rails of the treadmill. Find the
clipattached to the key (see the drawing above), and
slidethe clip onto the waistband of your clothes. Then,
insertthe key into the console. After a moment, the dis-
playswill light. IMPORTANT: In an emergency situa-
tion, the key can be pulled from the console, caus-
ing the walking belt to slow to a stop. Test the clip
by carefully taking a few steps backward; if the key
is not pulled from the console, adjust the position
of the clip.
CONSOLE DIAGRAM
Clip
Key
Reset
Thumb Pulse Sensor